Sorry, that product no longer exists
To help you find the product you were looking for, here are some other products that might suit your needs.
3 in. PVC Conduit Clamp (Case of 20) - Carlon
The 3 in. PVC Conduit Clamp is a high-strength clamp. That is designed for use with PVC conduit. The clamp allows PVC conduit to expand and contract freely, eliminating the conduit bowing caused by varying temperature changes.
Use the 1-1/4 in. Conduit Clamp to suspend electrical piping from the ceiling. This clamp is constructed of zinc-plated steel. Clamp is designed to accommodate 12- or 14-Gauge metal frame channels. Color: Electrogalvanized.
The 2-1/2 in. PVC Conduit Clamp is designed for use in the installation of PVC conduit. The high-strength, non-metallic clamp helps conduit expand and contract freely, resisting the bowing caused by temperature changes. The clamp is compatible with Sch....
1 in. Conduit Clamp Gold Galvanized (Case of 25) - Superstrut
Use the 1 in. Conduit Clamp to suspend electrical raceways from overhead locations. This clamp is capable of supporting up to 550 lbs. The clamp is made of steel construction with gold galvanized finish providing excellent corrosion resistance and a superior...
Ground clamps are for use in grounding wire or conduit. With RACO ground clamps, wire or conduit can be grounded to water pipes or ground rods. The RACO 2504 is for use with bare ground wire.
Ground clamps are for use in grounding wire or conduit. With RACO ground clamps, wire or conduit can be grounded to water pipes or ground rods. The RACO 2505 is for use with bare ground wire.
Use the 2 in. Iron 1-Hole Conduit Strap with Clamp-Back in indoor and outdoor locations to secure a rigid or IMC conduit to a mounting surface. This conduit strap offers zinc electroplating.
RACO Beam clamps are for use with hangers, bridle rings, and drop rods to support conduit from I-beams. The maximum load is 200 lbs. The 2510 is made of malleable iron construction.
RACO hubs are for use with threaded Rigid/IMC conduit. RACO hubs are designed to connect and bond conduit to a threadless opening in a box or enclosure. The pre-installed insulating bushing protects wires during pulling.
Clamp backs are for use with straps to permit space between the EMT/Rigid/IMC conduit and mounting surface. This should prevent buildup of snow, ice or rain between the conduit and the mounting surface minimizing weather rot. The curved design ensures...