411 Home Repair

Tools and Hardware

Sorry, that product no longer exists

To help you find the product you were looking for, here are some other products that might suit your needs.

<<Prev | 1 2 3 4 5 | Next>>

#3 Jaws for Oneway Scroll Chuck System

#3 Jaws for Oneway Scroll Chuck System - Rockler

These jaws fit the Oneway Scroll Chuck (#22719, sold separately) and Talon Chuck (#20761, sold separately) and have the mass and size necessary for turning larger bowls and vases. They are unparalleled in strength and holding capacity. The #3 jaws have...

$58.79 - LEARN MORE or BUY NOW

#1 Jaws for Oneway Scroll Chuck System

#1 Jaws for Oneway Scroll Chuck System - Rockler

Install these jaws on your Oneway Scroll Chuck (#22719, sold separately) or Talon Chuck (#20761, sold separately) for turning small bowls, knobs, vases or spindles.

$52.49 - LEARN MORE or BUY NOW

Jumbo Jaws for Oneway Scroll Chuck System

Jumbo Jaws for Oneway Scroll Chuck System - Rockler

When mounted on the Oneway Scroll Chuck (#22719, sold separately) or the Talon Chuck (#20761, sold separately), the machined solid aluminum plates of the Jumbo Jaws form a plate 11"e in diameter. With the rubber grippers and the combination of slots...

$115.49 - LEARN MORE or BUY NOW

Mini Jumbo Jaws for Oneway Scroll Chuck System

Mini Jumbo Jaws for Oneway Scroll Chuck System - Rockler

Because of their 8-1/2"e diameter, these Mini Jumbo Jaws for the Oneway Scroll Chuck (#22719, sold separately) and Talon Chuck (#20761, sold separately) work on smaller lathes. With the rubber grippers and the combination of slots and tapped holes...

$102.99 - LEARN MORE or BUY NOW

1" X 8 TPI Insert for Oneway Scroll Chuck System

1" X 8 TPI Insert for Oneway Scroll Chuck System - Rockler

Allows you to mount a Oneway Scroll Chuck (#22719, sold separately) or Talon Chuck (#20761, sold separately) to a lathe with a 1"e x 8 TPI drive spindle.

$31.49 - LEARN MORE or BUY NOW

1-1/4" X 8 TPI Insert for Oneway Scroll Chuck System

1-1/4" X 8 TPI Insert for Oneway Scroll Chuck System - Rockler

Allows you to mount a Oneway Scroll Chuck (#22719, sold separately) or Talon Chuck (#20761, sold separately) to a lathe with a 1-1/4"e x 8 TPI drive spindle.

$31.49 - LEARN MORE or BUY NOW

3/4" X 16 TPI Insert for Oneway Scroll Chuck System

3/4" X 16 TPI Insert for Oneway Scroll Chuck System - Rockler

Allows you to mount a Oneway Scroll Chuck (#22719, sold separately) or Talon Chuck (#20761, sold separately) to a lathe with a 3/4"e x 16 TPI drive spindle.

$31.49 - LEARN MORE or BUY NOW

#3 Jaws for Oneway Stronghold Chuck

#3 Jaws for Oneway Stronghold Chuck - Rockler

The #3 Jaws for the beefy Oneway Stronghold Chuck (#30589, sold separately) have the mass and size necessary for large bowls and vases. With their profiled jaws, they provide maximum gripping power with minimal damage to the piece.

$57.79 - LEARN MORE or BUY NOW

Spigot Jaws for Oneway Talon Chuck

Spigot Jaws for Oneway Talon Chuck - Rockler

The Oneway Spigot Jaws are machined long and deep for a secure grip on narrow spindles, tenons and cups. Serrations on the outside provide excellent grip while expansion chucking. Not to be used with the woodworm screw. For use with Oneway Talon Chuck...

$45.19 - LEARN MORE or BUY NOW

Spigot Jaws for Oneway Stronghold Chuck

Spigot Jaws for Oneway Stronghold Chuck - Rockler

Spigot Jaws for the Oneway Stronghold Chuck (#30589, sold separately) are deep to provide a better grip on smaller parts. Both outside and inside surfaces of the jaws are serrated to grip the workpiece.

$52.49 - LEARN MORE or BUY NOW

<<Prev | 1 2 3 4 5 | Next>>