411 Home Repair

Tools and Hardware

Sorry, that product no longer exists

To help you find the product you were looking for, here are some other products that might suit your needs.

<<Prev | 1 2 3 4 5 | Next>>

Freud® LU77M Industrial Thin Kerf Non-Ferrous Metal Saw Blades

Freud® LU77M Industrial Thin Kerf Non-Ferrous Metal Saw Blades - Rockler

This thin kerf, heavy-duty, non-ferrous metal cutting blade produces an excellent finish. These blades have custom designed gullets to minimize chip build-up and specially formulated carbide for long life. Freud recommends use of a liquid lubricant when...

$62.47 - LEARN MORE or BUY NOW

Milwaukee 48-01-6187 9 in. 14 TPI Thin Kerf SAWZALL Blade (50-Pack)

Milwaukee 48-01-6187 9 in. 14 TPI Thin Kerf SAWZALL Blade (50-Pack) - Milwaukee

(50) 9 in. 14 TPI Thin Kerf SAWZALL Blade - 48-01-6187. Optimized tooth design provides twice the life than previous generation SAWZALL blades. Tough Neck ribs strengthen the blade tang and minimize breakage. Thin Kerf metal-cutting blades with the Double...

$82.99 - LEARN MORE or BUY NOW

Freud LU77M012 12 in. 96 Tooth Thin Kerf Non-Ferrous Metal Saw Blade

Freud LU77M012 12 in. 96 Tooth Thin Kerf Non-Ferrous Metal Saw Blade - Freud

12 in. 96T Thin Kerf Non-Ferrous Metal Saw Blade - LU77M012. Silver ICE coating reduces friction and heat build-up for longer blade life. Thin kerf requires less power and allows for faster feed rate and reduced waste. Freud-made TiCo Carbide is specifically...

$82.99 - LEARN MORE or BUY NOW

Olson® 5-inch Pin End Thin Kerf Scroll Saw Blades, 6-Pack

Olson® 5-inch Pin End Thin Kerf Scroll Saw Blades, 6-Pack - Rockler

Thin kerf scroll saw blades for extra-fine cuts in hard or soft wood, as well as plastic. Capable of cutting materials from 3/32-inch to 1/2-inch thick, and of cutting radius´s as small as 1/8-inch.

$5.99 - LEARN MORE or BUY NOW

Freud® LU91M Industrial Thin Kerf Sliding Compound Miter Saw Blades

Freud® LU91M Industrial Thin Kerf Sliding Compound Miter Saw Blades - Rockler

This thin kerf industrial blade provides a superior finish cut with sliding compound miter saws. The 5° negative hook angle helps prevent the blade from being too aggressive and pushes the work piece down and towards the fence. Thin kerf blades remove...

$55.47 - LEARN MORE or BUY NOW

Milwaukee 49-22-0240 8-Piece Sawzall Blade Set

Milwaukee 49-22-0240 8-Piece Sawzall Blade Set - Milwaukee

(2) 6 in. 14 TPI Thin Kerf Ice Hardened SAWZALL Blades - 48-00-4182. (2) 6 in. 18 TPI Thin Kerf Ice Hardened SAWZALL Blades - 48-00-4184. (2) 6 in. 5 TPI SAWZALL Blades - 48-00-5035. (2) 9 in. 5 TPI SAWZALL Blades - 48-00-5036. NAIL GUARD combines an...

$18.99 - LEARN MORE or BUY NOW

Milwaukee 49-22-0220 M12 Hackzall General Purpose Blade Set (10pc)

Milwaukee 49-22-0220 M12 Hackzall General Purpose Blade Set (10pc) - Milwaukee

(2) Wood Blades - 49-00-5460. (3) EMT Blades - 49-00-5418. (2) Duct Blades - 49-00-5424. (3) Long PVC Blades - 49-00-5614. Storage Pouch. Designed with a thin kerf for up to 35% more cuts per charge. The short blade length is ideal for cutting in tight...

$13.99 - LEARN MORE or BUY NOW

Freud® LU74R Industrial Thin Kerf Ultimate Cut-Off Saw Blades

Freud® LU74R Industrial Thin Kerf Ultimate Cut-Off Saw Blades - Rockler

This thin kerf blade produces glass smooth surfaces when crosscutting hardwoods and softwoods, thanks to Freud´s unique side grinding technology. The larger blades are ideal for miter box applications. Thin kerf blades remove less material than...

$71.47 - LEARN MORE or BUY NOW

Bosch CB748ST 7-1/4 in. 48-Tooth Metal Cutting Circular Saw Blade

Bosch CB748ST 7-1/4 in. 48-Tooth Metal Cutting Circular Saw Blade - Bosch

Double Ended T25-T30, 1-1/2 in. Screw Driver Bit. Patented C-3 Dyanite carbide teeth are diamond ground to be precision sharp from the start and stay sharp up to 6X longer than standard carbide. Impact resistant tri-metal shims between each carbide tip...

$25.99 - LEARN MORE or BUY NOW

Thin Kerf Parting Tool, 1/16´´

Thin Kerf Parting Tool, 1/16´´ - Rockler

Designed to give the cleanest cuts with a minimum of waste, this Thin Kerf Parting Tool features a 1-1/4"e blade width that eliminates the flexing and twisting associated with thin blades. The double-bevel HSS cutting face imparts fine parting lines...

$39.99 - LEARN MORE or BUY NOW

<<Prev | 1 2 3 4 5 | Next>>