411 Home Repair

Tools and Hardware

Sorry, that product no longer exists

To help you find the product you were looking for, here are some other products that might suit your needs.

<<Prev | 1 2 3 4 5 | Next>>

Nova Hybrid Lathe Stand for Nova 1624-44 and Nova DVR XP Lathes

Nova Hybrid Lathe Stand for Nova 1624-44 and Nova DVR XP Lathes - Rockler

Nova´s 25048 Hybrid Lathe Stand provides a solid, yet lightweight foundation for your Nova DVR XP Lathe (#45311, sold separately). Made from a mix of solid steel and cast iron, it provides rigid strength, but is light enough for easier portability....

$341.99 - LEARN MORE or BUY NOW

Nova Lathe Handwheel

Nova Lathe Handwheel - Rockler

The Nova Lathe Handwheel is used on the outboard end of the headstock spindle, and can be used to rotate the turning blank or to slow down the spindle by hand once the lathe is switched off. Made from precision machined solid 1045K steel for extra strength...

$35.49 - LEARN MORE or BUY NOW

NOVA LHB Lathe Handwheel Accessory

NOVA LHB Lathe Handwheel Accessory - NOVA

Lathe Handwheel Accessory - LHB. Used on outboard end of lathe headstock to position work by hand. Machines from solid 1045K steel for durability and rigidity. Add customized wooden outer for extra comfort and personalization. Hollow to allow for vacuum...

$25.99 - LEARN MORE or BUY NOW

Nova Lathe Bed Extension

Nova Lathe Bed Extension - Rockler

This bed extension is for use with the Nova DVR XP and Nova 1624-44 lathes (#45311 and #48465, sold separately). It is a solid cast iron unit that adds 20"e to the spindle turning capacity of your lathe. Multiple units can be added as needed. Features:Each...

$235.99 - LEARN MORE or BUY NOW

Nova Chuck Inserts/Adapters

Nova Chuck Inserts/Adapters - Rockler

Teknatool uses an easy and inexpensive insert/adapter system on all insert-style Nova chucks. The inserts are available with a variety of thread patterns on the interior, but all have the same exterior thread to fit all your Nova chuck(s). Just check...

$25.99 - LEARN MORE or BUY NOW

NOVA 57073 33 in. Outrigger Accessory for the 2024 Lathe

NOVA 57073 33 in. Outrigger Accessory for the 2024 Lathe - NOVA

33 in. Outrigger Accessory for the 2024 Lathe - 57073. Mounting Screws. Built from solid cast iron, it provides with strength and durability while also dampening vibration. Designed to be installed and removed easily so it can be out of the way when not...

$289.99 - LEARN MORE or BUY NOW

Nova Tool Rest

Nova Tool Rest - Rockler

The tool rest is one of the most important features on any lathe. The rest should allow for maximum flexibility of chisel movement and provide adequate chisel support as close to the cutting edge as possible. These Nova tool rests are made of cast iron...

$29.99 - LEARN MORE or BUY NOW

Nova Insert/Adapter, 1" 8-TPI RH/LH Dual Thread

Nova Insert/Adapter, 1" 8-TPI RH/LH Dual Thread - Rockler

All insert-style Nova chucks use an easy and inexpensive insert/adapter system that lets you mount your chuck on virtually any lathe. The inserts are available with a variety of thread patterns on the interior, but all have the same exterior thread to...

$25.99 - LEARN MORE or BUY NOW

Nova 2MT Spur Center

Nova 2MT Spur Center - Rockler

This is the standard spur center included with all Nova lathes, and it also works well as a replacement or as an upgrade for another lathe. Its rugged four-prong profile bites into your wood blank to provide a secure grip for spindle turnings and other...

$24.99 - LEARN MORE or BUY NOW

Nova Outrigger Lathe Accessory

Nova Outrigger Lathe Accessory - Rockler

The Nova OR3000 Outrigger Accessory is for use with the Nova 3000, Nova DVR, Nova DVR XP and Nova 1624-44 lathes (sold separately). With the outrigger installed, you´ll get rock steady chisel support when turning in the outboard mode, allowing you...

$319.99 - LEARN MORE or BUY NOW

<<Prev | 1 2 3 4 5 | Next>>