411 Home Repair

Tools and Hardware

Sorry, that product no longer exists

To help you find the product you were looking for, here are some other products that might suit your needs.

<<Prev | 1 2 3 4 5 | Next>>

Nova Hybrid Lathe Stand for Nova 1624-44 and Nova DVR XP Lathes

Nova Hybrid Lathe Stand for Nova 1624-44 and Nova DVR XP Lathes - Rockler

Nova´s 25048 Hybrid Lathe Stand provides a solid, yet lightweight foundation for your Nova DVR XP Lathe (#45311, sold separately). Made from a mix of solid steel and cast iron, it provides rigid strength, but is light enough for easier portability....

$341.99 - LEARN MORE or BUY NOW

Nova Tool Rest

Nova Tool Rest - Rockler

The tool rest is one of the most important features on any lathe. The rest should allow for maximum flexibility of chisel movement and provide adequate chisel support as close to the cutting edge as possible. These Nova tool rests are made of cast iron...

$29.99 - LEARN MORE or BUY NOW

Nova Cast Iron Lathe Stand for Nova 1624-44 and Nova DVR XP Lathes

Nova Cast Iron Lathe Stand for Nova 1624-44 and Nova DVR XP Lathes - Rockler

Made from high quality cast iron, with CAD designed gussets at critical points, this stand makes a stable, rock steady base for both the Nova 1624-44 and the Nova DVR XP lathes (#48465 and #45311, sold separately).Features:Solid cast iron constructionCAD...

$469.99 - LEARN MORE or BUY NOW

Nova Lathe Bed Extension

Nova Lathe Bed Extension - Rockler

This bed extension is for use with the Nova DVR XP and Nova 1624-44 lathes (#45311 and #48465, sold separately). It is a solid cast iron unit that adds 20"e to the spindle turning capacity of your lathe. Multiple units can be added as needed. Features:Each...

$235.99 - LEARN MORE or BUY NOW

Nova Lathe Handwheel

Nova Lathe Handwheel - Rockler

The Nova Lathe Handwheel is used on the outboard end of the headstock spindle, and can be used to rotate the turning blank or to slow down the spindle by hand once the lathe is switched off. Made from precision machined solid 1045K steel for extra strength...

$35.49 - LEARN MORE or BUY NOW

NOVA OR3000 29 in. Outrigger Accessory for NOVA Lathes

NOVA OR3000 29 in. Outrigger Accessory for NOVA Lathes - NOVA

29 in. Outrigger Accessory for NOVA Lathes - OR3000. Mounting Screws. Built from heavy-duty cast iron and designed to provide rock steady chisel support for turning work up to 29 in. in diameter. Arm system articulates out to give adequate clearance from...

$284.99 - LEARN MORE or BUY NOW

Nova Outrigger Lathe Accessory

Nova Outrigger Lathe Accessory - Rockler

The Nova OR3000 Outrigger Accessory is for use with the Nova 3000, Nova DVR, Nova DVR XP and Nova 1624-44 lathes (sold separately). With the outrigger installed, you´ll get rock steady chisel support when turning in the outboard mode, allowing you...

$319.99 - LEARN MORE or BUY NOW

Nova Acruline 2MT Alignment System

Nova Acruline 2MT Alignment System - Rockler

Use the Nova Acruline 2MT Alignment System to bring the centers of your Nova lathe back into perfect alignment. This is especially useful on lathes with a pivoting headstock, which should be realigned when the headstock is moved back to the inline position....

$21.49 - LEARN MORE or BUY NOW

NOVA 9006 Woodsurfer Bowl Rest

NOVA 9006 Woodsurfer Bowl Rest - NOVA

Woodsurfer Bowl Rest - 9006. Cast from high grade cast iron with solid section thickness and CAD generated gussets at critical points so it can withstand extremely high stresses with practically no distortion. Sturdy enough to handle the immense turning...

$44.99 - LEARN MORE or BUY NOW

Nova 2MT Spur Center

Nova 2MT Spur Center - Rockler

This is the standard spur center included with all Nova lathes, and it also works well as a replacement or as an upgrade for another lathe. Its rugged four-prong profile bites into your wood blank to provide a secure grip for spindle turnings and other...

$24.99 - LEARN MORE or BUY NOW

<<Prev | 1 2 3 4 5 | Next>>