411 Home Repair

Tools and Hardware

Sorry, that product no longer exists

To help you find the product you were looking for, here are some other products that might suit your needs.

<<Prev | 1 2 3 4 5 | Next>>

NOVA ISNS 5/8 in. Plain Bore Chuck Insert Adaptor

NOVA ISNS 5/8 in. Plain Bore Chuck Insert Adaptor - NOVA

5/8 in. Plain Bore Chuck Insert Adaptor - ISNS. Quickly and inexpensively adapt your NOVA chuck to almost any lathe depending on insert thread size. Precision machined from 1045 high tensile steel for durability and ruggedness. Compatible with all NOVA...

$21.99 - LEARN MORE or BUY NOW

NOVA ITNS 1 in. 8 TPI Dual Threaded Chuck Insert Adaptor

NOVA ITNS 1 in. 8 TPI Dual Threaded Chuck Insert Adaptor - NOVA

1 in. 8 TPI Dual Threaded Chuck Insert Adaptor - ITNS. Quickly and inexpensively adapt your NOVA chuck to almost any lathe depending on insert thread size. Precision machined from 1045 high tensile steel for durability and ruggedness. Compatible with...

$15.99 - LEARN MORE or BUY NOW

Nova Chuck Inserts/Adapters

Nova Chuck Inserts/Adapters - Rockler

Teknatool uses an easy and inexpensive insert/adapter system on all insert-style Nova chucks. The inserts are available with a variety of thread patterns on the interior, but all have the same exterior thread to fit all your Nova chuck(s). Just check...

$25.99 - LEARN MORE or BUY NOW

Nova Insert/Adapter, 1" 8-TPI RH/LH Dual Thread

Nova Insert/Adapter, 1" 8-TPI RH/LH Dual Thread - Rockler

All insert-style Nova chucks use an easy and inexpensive insert/adapter system that lets you mount your chuck on virtually any lathe. The inserts are available with a variety of thread patterns on the interior, but all have the same exterior thread to...

$25.99 - LEARN MORE or BUY NOW

Nova Insert/Adapter, Blank, Unthreaded

Nova Insert/Adapter, Blank, Unthreaded - Rockler

If you have a unique lathe with a non-standard spindle thread, you can still install a Nova chuck on it. This blank Insert/Adapter can be threaded to match spindles up to 1-1/8"e (28mm). The outer diameter is pre-threaded - simply screw it into the...

$25.99 - LEARN MORE or BUY NOW

NOVA 6040 12 in. Large Cole Jaw Set

NOVA 6040 12 in. Large Cole Jaw Set - NOVA

12 in. Large Cole Jaw Set - 6040. (8) Holders. Screws. Fits on any NOVA Chuck with the same jaw fixing system across all NOVA Chuck models, providing total system interchangeability and maximum flexibility. Precisely cast solid aluminum segments and strong...

$82.99 - LEARN MORE or BUY NOW

NOVA 23079 Universal Chuck Spanner

NOVA 23079 Universal Chuck Spanner - NOVA

Universal Chuck Spanner - 23079. Fits all NOVA chucks for easy and fast loosening and is designed to make it to unscrew the chuck from the lathe spindle. It can be used as a body grip handle for original NOVA chuck, SuperNova and SuperNova2 chuck. It...

$15.99 - LEARN MORE or BUY NOW

Nova Chuck Fastening Spares Kit

Nova Chuck Fastening Spares Kit - Rockler

The Nova Chuck Fastening Spares Kit is used to secure accessory jaws to your Nova chucks. The kit comes standard with all Nova chucks - this is a replacement kit to keep you up and running in the event a fastener is lost or damaged. The kit contains eight...

$13.49 - LEARN MORE or BUY NOW

Nova Universal Chuck Spanner

Nova Universal Chuck Spanner - Rockler

Finding a wrench to fit your Nova chuck and inserts can be difficult. This handy all-in-one tool is an economic way to have a dedicated solution in your chuck toolbox. The Nova Spanner has a thin section that fits easily between the chuck and lathe where...

$21.49 - LEARN MORE or BUY NOW

Nova Chuck Spur Center

Nova Chuck Spur Center - Rockler

This Spur Center is just the answer for turners who use their Nova Chuck most of the time, and don´t want to have to remove the chuck for spindle work. Just clamp the Spur Center into your chuck, and you´re ready to go. It´s a rugged,...

$22.49 - LEARN MORE or BUY NOW

<<Prev | 1 2 3 4 5 | Next>>