411 Home Repair

Tools and Hardware

Sorry, that product no longer exists

To help you find the product you were looking for, here are some other products that might suit your needs.

<<Prev | 1 2 3 4 5 | Next>>

Rockler 14° Dovetail Router Bit - 8mm Shank

Rockler 14° Dovetail Router Bit - 8mm Shank - Rockler

The 8mm shank of this dovetail router bit is 25% larger than typical 1/4"e bits for reduced chatter. It fits all existing Rockler dovetail jigs.

$19.99 - LEARN MORE or BUY NOW

Rockler 8° Dovetail Router Bit - 8mm Shank

Rockler 8° Dovetail Router Bit - 8mm Shank - Rockler

The 8mm shank of this dovetail router bit is 25% larger than typical 1/4"e bits for reduced chatter. It fits all existing Rockler dovetail jigs.

$19.99 - LEARN MORE or BUY NOW

Fulcrum Pins for Rockler Router Table Plates

Fulcrum Pins for Rockler Router Table Plates - Rockler

Sometimes called a starter pin or guide pin, these Router Table Fulcrum Pins function as stable guides when routing curved profiles without a fence. When routing inside curves, for example, it becomes impossible to use a straight fence for stability,...

$4.49 - LEARN MORE or BUY NOW

Rockler Miniature Classic Roman Ogee Router Bit - 13/16" Dia x 3/8" H x 1/4" Shank

Rockler Miniature Classic Roman Ogee Router Bit - 13/16" Dia x 3/8" H x 1/4" Shank - Rockler

Don´t let ordinary router profiles overwhelm your more subtle projects. Rockler´s miniature router Bits are the finest available for use in creating jewelry boxes, humidors, and other small boxes and crafts. This one features an attractive...

$19.99 - LEARN MORE or BUY NOW

Rockler 4-Pc. Dovetail Router Bit Upgrade Set - 8mm Shank

Rockler 4-Pc. Dovetail Router Bit Upgrade Set - 8mm Shank - Rockler

This router bit set features 8mm shanks, which are 25% larger than 1/4"e bits. The extra mass in the shank helps to reduce chatter. Ideal for joining case goods, the set includes 1/2"e x 14° and 8° dovetail bits, a 5/16"e straight...

$54.99 - LEARN MORE or BUY NOW

Rockler Signmaking Carbide Router Bits - 1/4" Shank

Rockler Signmaking Carbide Router Bits - 1/4" Shank - Rockler

Specially designed for signmaking applications, with a flatter bottom to prevent peaks in routed letters. Recommended for use with plunge router. 1/4"e shank.The 3/16"e Signmaking Carbide Router Bit is required for the 1-1/2"e Rockler Interlock...

$17.99 - LEARN MORE or BUY NOW

Rockler Pattern Flush Trim Router Bit - 1/2" Dia x 1" H x 1/4" Shank

Rockler Pattern Flush Trim Router Bit - 1/2" Dia x 1" H x 1/4" Shank - Rockler

Top quality router bits that meet the high standards of Rockler Woodworking and Hardware. Two flutes, for fast, smooth, accurate trim cuts. Precision ground to close tolerances, easily used for pattern or template cutting.

$21.99 - LEARN MORE or BUY NOW

Rockler Round Over Beading Router Bit Set - 1/4" Shank

Rockler Round Over Beading Router Bit Set - 1/4" Shank - Rockler

Get six router bit profiles in one handy set! This router bit set includes three popular sizes of radius bits with bearings to convert each bit from a round-over to a bead edge profile. Router bits are tipped with premium grade carbide, precision balanced...

$79.99 - LEARN MORE or BUY NOW

Rockler Router Plate Insert With 2-1/2" Opening For Large Plates

Rockler Router Plate Insert With 2-1/2" Opening For Large Plates - Rockler

The interchangeable insert for standard bits features a 2-1/2´´ opening. The 4-3/8´´ OD allows this insert to fit into a large plate with a 3-11/16´´ opening.Is This The Right Insert For My Router Plate?Fits The Following...

$8.99 - LEARN MORE or BUY NOW

Rockler Shutter Bead Router Bit - 7/8" Dia x 9/16" H x 1/2" Shank

Rockler Shutter Bead Router Bit - 7/8" Dia x 9/16" H x 1/2" Shank - Rockler

For use with the Rockler Shutter System. Use this router bit to add elegance and style to your custom shutters. Use with the included bearing to put a bead on your shutter stiles, then remove the bearing to cut a chamfer on your shutter rails. 1/2"e...

$29.99 - LEARN MORE or BUY NOW

<<Prev | 1 2 3 4 5 | Next>>