411 Home Repair

Tools and Hardware

EZSmart Track Saw System

Home > Rockler > Power Tool Accessories > Saw Accessories > Saw Guides

EZSmart Track Saw System The EZSmart Track Saw System gives you absolutely straight cuts with virtually zero tear-out or chipping—all with the circular saw of your choice! Unlike many similar systems, this one includes a Universal Saw Base that can be fitted to over 90% of left- or right-bladed circular saws. That means there´s no need to pay a premium for a specialty saw. The saw glides effortlessly down the rail for rip cuts, cross cuts, and angle cuts. Thanks to the guide rail´s zero-clearance edges and the chip-free inserts on the bottom of the base, the cut quality is far better than typical table saws. And since the wood is captive under the track, there is no danger of kickback. Includes two EZSmart Clamps capable of securing even the smallest boards under the track. If you want an even longer guide rail, additional Guide Rails (55763 and 50438) and Connectors (one of 57360 and two of 56171 will be required) are available separately. Made in USA. Included Universal Saw Base can be fitted to over 90% of left- or right-bladed 6-1/2´´, 7-1/4´´ and 8-1/4´´ circular sawsGuide rail is bi-directional, and features two anti-chip edges—use one for 90° cuts, the other for bevel cutsPatent-pending anti-chip inserts provide zero clearance on either side of the blade for astoundingly clean cutsDanger of kickback is all but eliminated by the included anti-kickback fin, which prevents the material from bindingNo more lugging around a heavy table saw to job-sites; get proven results with this lightweight kitIncludes anti-chip inserts for use either on the guide rail or off

Only $169.99 at Rockler.com

Where to Buy EZSmart Track Saw System
Contact Us | Submit Articles | RSS | SM Networks © 2016