Liberon Ring Remover
|Those pesky white rings appear everywhere! Hazy marks can occur in certain finishes within 15 minutes! What´s happening is that moisture or humidity is getting trapped within the hard finish layer. (If a black mark appears it has penetrated through the finish onto the wood, and a wood bleach will be necessary.) Ring Remover removes white heat and water marks on many hard surfaces, including varnishes, shellacs, lacquer, French polish and polyurethane. One of Liberon´s top selling repair products!Features:Easy to apply! Use a clean lint-free cotton cloth and rub in a circular motion over the mark. Allow to dry to powder before buffing with a soft cloth.For waxed surfaces, first remove the wax with a good cleaner or mineral spirits, then apply Ring Remover. Follow the directions on the bottle, then re-wax the surface with paste wax.After buffing, if the repaired spot is a bit shiny, take a dry Liberon 4/0 steel wool pad to break the shine back down to a matte finish.
Only $20.99 at Rockler.com