Rockler Aluminum Pro Router Plates
|A router table insert plate makes it easy to lift your router out and set it on the table for comfortable bit changes, height adjustments, maintenance and even to use your router free hand or with a straight edge guide. It saves you from a lot of backaches, squinting and bumps on the back of the head from stooping under the table. Our Aluminum Pro Plates are CNC-machined for flatness, will not sag, and are generously dimensioned at 8-1/4´´ x 11-3/4´´. They work equally as well with shop-made router tables as they do with Rockler tables, and fit both our current tables and most of our old tables as well. Additional insert ring sizes are available (sold separately). Plates A & B accept Standard sized rings. Plates C & D accept Large sized rings. Which Router Plate Do I Need?To choose a pre-drilled plate, find your router below. Router Plate A: Bosch MRC23 Series, 1617-1618 DeWalt 616-618 Hitachi M12VC (fixed and kit) Makita 1100 Milwaukee 5615-5624 Porter-Cable 690 Porter-Cable 890 Porter-Cable 7529 Porter-Cable 97529 Porter-Cable 8529 Ridgid 2930 Combo KitNote: Current models of the Porter-Cable 892 require at least two screws to be 1/2"e long versus 5/8"e.Router Plate B: Craftsman Standard DeWalt DW621 DeWalt DW621K Freud FT 1700E Freud 1702VCEKRouter Plate C: Milwaukee 5625-20 Porter-Cable 7518 Porter-Cable 7519 Porter-Cable 7538 Porter-Cable 7539 Triton TRA001 Triton MOF001Router Plate D: Bosch 1619-1619EV DeWalt 625 Freud FT2000 If your router is not listed: Choose from two non-drilled plates-one with a 4´´ insert ring (#56935), and the other a 4-3/8´´ insert ring (#50850)-and drill the plate to fit your router.
Only $59.99 at Rockler.com