411 Home Repair

Tools and Hardware

Rockler Auto-Lock T-Track Hold Down Clamp

Home > Rockler > Woodworking Jigs > Jig Parts & Kits > T-Track

Rockler Auto-Lock T-Track Hold Down Clamp Tightening Rockler´s new Auto-Lock T-Track Hold Down Clamp is literally an open-and-shut case—just press down the lever to secure anything from veneer sheets to lumber up to 2-3/4´´ thick! Once set, the clamping pressure is always the same regardless of workpiece size, and is adjusted only if needed with the set screw. The clamp pivots 360°, allowing you to clamp near the workpiece edge to minimize obstructions. A large knurled wheel locks the clamp securely to the T-track. The toggle foot is adjusted with the knurled aluminum knob for best placement—no wrenches required—while the clamping foot pivots on a ball joint so it can adapt to any angle and is rubber coated to prevent marring. Simply lift the lever to release.Features:Auto-adjust mechanism allows you to clamp various thicknesses without readjustingCenter of clamping foot extends from 1-1/2´´ to 3-1/2´´ from center of trackMax height capacity is 2-3/4´´Clamping force is adjustable from 5-250 lbs of pressureLarge locking wheel secures clamp to T-trackClamps slide into any T-track that accepts 5/16´´ T-bolts, including our T-Track Table (#46654, sold separately) and many of the CNC Shark tablesAn optional Mounting Bracket (#57940, sold separately) is available for securing the clamp to shop-made jigs and fixturesHeavy-duty metal construction

Only $29.99 at Rockler.com

Where to Buy Rockler Auto-Lock T-Track Hold Down Clamp
Contact Us | Submit Articles | RSS | SM Networks © 2016
>