Rockler JIG IT® Undermount Drilling Guide
|In order to install your Blum Tandem drawer slides, each drawer box must be drilled with six precisely-aligned holes. Our Undermount Drilling Guide makes that process fast and easy. Simply lay the guide on its side and butt it up to the front corners to drill the smaller angled holes that accept the locking devices. Not only will the location be spot-on, but the 15° angle is also set. Your bit won´t wander, and driving the screws is a cinch. To drill the 6mm holes in the rear of the drawer box, stand the Drilling Guide up on its legs and position it over the notch. The end result is a drawer box that clicks into place on the slides perfectly, every time.
Only $29.99 at Rockler.com