Rockler Universal Fence Clamps with Clamp-It® Square, Special Offer!
|You might think clamping a 90 degree joint couldn´t get any easier with our patented Clamp-It® Assembly Square, but it just did. That´s because we´re including a pair of Universal Fence Clamps in this all-in-one package! The Clamp-It® Assembly Square replaces custom clamping jigs, acts as a third hand, and eliminates the need for long clamps. Used with the included Universal Fence Clamps, you can assemble any two pieces at 90 degrees, or even a cabinet one corner at a time. Features:Works with any joinery technique, from nails to hand cut dovetailsIdeal for every stage of construction, from assembling plywood cabinets to face frames and drawers Clamp-It® is also perfect for framing decks, drawer assembly, and installing rails and balustersFence Clamps may also be used to secure a huge variety of shop-made auxiliary fences to your existing fences without having the clamp interfere with your workEliminates the need for clunky wood screws and C-clamps or screwing into your expensive fence Use the fence clamps singly as stop blocks, or in pairs for sacrificial fences, half-fences, resaw fences, and a variety of other fixturesWorks great for table saws, band saws, cutoff saws, router fences and moreAttach the Clamp-It® to a work surface using the Universal Fence Clamps, and it becomes a right angle fixture for bench assembly. Compact, lightweight clamps secure the Clamp-It® Square for tight 90 degree angle joints Clamp-It® features a series of 3/8"e holes to accommodate the Universal Fence Clamp Fence ClampsPlus, the Universal Fence Clamps can be used separately with all your shop-made auxiliary fences.Clamp-It® Square´s patented computer design is manufactured from high impact, rigid polycarbonate to ensure strength and accuracyClamp-It® Measures 8"e X 8"e X 1 - 1/2"eFence Clamps are made of rigid aluminum body with steel threaded componentsFence Clamps: Range of travel 1/2"e-5-3/4"e (1/2"e minimum assumes a 3/4"e auxiliary fence; you can clamp to an even thinner primary fence if you use a thicker auxiliary fence)Auxiliary fences may need a 3/8"e hole drilled to accommodate the Fence Clamps
Only $29.99 at Rockler.com