411 Home Repair

Tools and Hardware

Tap for Rolling Barn Door Track

Home > Rockler > Hardware > Project Hardware > Rolling Door Hardware

Tap for Rolling Barn Door Track This tap is used for cutting threads in the 6´ track included with our Rolling Barn Door Hardware Kits (sold separately). Threads must be tapped in the ends of the track so that the end stops may be installed. The 6´ tracks arrive untapped, so the ends must be tapped even if the track is intended to be used full-length. For your convenience, a hole is drilled through the entire length of the track, so no drill bit is required. Sold singly. For use with Rolling Barn Door Hardware Kits (e.g. 53578, sold separately)1/4-20 threadSquare shank for use with a hand-operated tap wrench or with a cordless drillStraight flute with right-hand cutTaper of 3-5 threads for easy, accurate thread starting

Only $8.00 at Rockler.com

Where to Buy Tap for Rolling Barn Door Track
Contact Us | Submit Articles | RSS | SM Networks © 2016
>