Thin Stock Threaded Inserts, 4-Pack
|If you´re looking for a threaded insert for thin material, then you´ve found it.Until now, the length of most threaded inserts only allowed them to be usedwith 3/4" material or thicker, but the wide, flat design of this insert eliminatesthe need for external threads, allowing it to be used in material as thin as 1/2".Just use a 3/32" slot cutter or a thin kerf saw blade to create a groove in theedge of your material, drill a hole where the insert will be, and you´re ready forassembly. Accepts any bolt with a 10-32 threading.Technical Details:Since the Thin Stock Threaded Insert is flat, it doesn´t require the thick materialof a normal threaded insert. Wide profile spreads out the load of the screw to prevent pull-through. Tapped to accept any bolt with a 10-32 threading. Use a 3/32" x 1-7/8" diameter slot cutter to create the pocket for the insert. Most thin kerf saw blades also have a 3/32" kerf, and will work for creating thepocket. Made of galvanized steel.
Only $4.99 at Rockler.com