411 Home Repair

Tools and Hardware

Rockler

Home > Rockler

<<Prev | 138 139 140 141 142 143 144 145 146 | Next>>

Blokkz Squid Center Finder

Blokkz Squid Center Finder -

Unlike most other center finders, the Blokkz "eSquid"e lets you quickly and easily find the center of square and rectangular stock in addition to the usual round stock. It also acts as a centering punch, as it features an integral sharpened awl,...

$19.99 - LEARN MORE or BUY NOW

Jet® JWL-1015 10´´ x 15´´ Wood Lathe

Jet® JWL-1015 10´´ x 15´´ Wood Lathe -

Whether for the novice woodturner searching for an affordable, user-friendly starter lathe, or the advanced turner adding a mini-lathe to their lineup, the new JET 1015 makes an ideal choice. With 15-1/2"e"e between centers, and a 10"e"e...

$479.99 - LEARN MORE or BUY NOW

Rockler Dust Right® Multi-Port Quick Release Starter Kit

Rockler Dust Right® Multi-Port Quick Release Starter Kit -

Includes 2-1/2"e and 4"e Dust Right® Tool Ports that connect tightly to any shop tool with a 2-1/2"e or 4"e dust port, while the other fits perfectly into the Dust Right® Handle, especially when used with the included Keyed 4"e...

$39.99 - LEARN MORE or BUY NOW

Freud® 63-100 Slotting Cutter Router Bit - 2&quote Dia x 1/16&quote H x 1/4&quote Shank

Freud® 63-100 Slotting Cutter Router Bit - 2"e Dia x 1/16"e H x 1/4"e Shank -

Includes three wing slotting cutter, arbor and ball bearing. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on hand-held and table-mounted portable routers.

$25.97 - LEARN MORE or BUY NOW

FlexCut® SK367 1/8&quote x 45° V-Spoon

FlexCut® SK367 1/8"e x 45° V-Spoon -

This V-shaped spoon gouge from Flexcut feature a shank that´s curved at the end, much like a deep soup spoon. The curved shank lets you reach the bottoms of recesses and other hard-to-access areas. The V-shaped profile is ideal for parting, as well...

$15.99 - LEARN MORE or BUY NOW

Freud® 41-502 Radius Laminate Trim Router Bit - 1/2&quote Dia x 3/8&quote H x 1/4&quote Shank

Freud® 41-502 Radius Laminate Trim Router Bit - 1/2"e Dia x 3/8"e H x 1/4"e Shank -

This Laminate Trimming Router Bit from Freud trims plastic laminate edges in a fraction of the time that it takes to hand file them. Plus, the 1/16"e radius gives you a silky smooth edge with no burrs or sharp spots. It´s ideal for countertop-grade...

$29.47 - LEARN MORE or BUY NOW

Freud® 66-100 Solid Carbide Bevel Trim Router Bit - 1/4&quote Dia x 1/4&quote H x 1/4&quote Shank

Freud® 66-100 Solid Carbide Bevel Trim Router Bit - 1/4"e Dia x 1/4"e H x 1/4"e Shank -

With its slight 7° bevel, this laminate trimming bit will give you a nice, defined edge with just enough angle to take away the sharpness. The shank extends beyond the cutting edge, so the bit self-pilots against the substrate. Without the need a...

$9.47 - LEARN MORE or BUY NOW

FlexCut® SK735 7/16´´ Macaroni Carving Tool

FlexCut® SK735 7/16´´ Macaroni Carving Tool -

Flexcut´s Macaroni Carving Tool is essentially two V-tools in one, and can be used at an angle for parting, creating lines and texturing. In addition, it is used as a channeling tool for flat surfaces with an adjoining, raised border. This is an...

$16.99 - LEARN MORE or BUY NOW

FlexCut® SK760 1/2´´ x 60° Soft V-Tool

FlexCut® SK760 1/2´´ x 60° Soft V-Tool -

Flexcut´s Soft V-Tool is similar to a standard V-Tool, but the point of the V is slightly rounded, allowing it to double as a small gouge. It can also be used as a parting tool for creating lines and textures, and it can be rolled onto its side...

$16.99 - LEARN MORE or BUY NOW

FlexCut® SK308 #2 x 5/16´´ Double-Bevel Skew Chisel

FlexCut® SK308 #2 x 5/16´´ Double-Bevel Skew Chisel -

With the cutting edge skewed at an angle relative to the sides of the blade, this carving chisel can be used to reach into corners and other tight spaces. It also excels at creating lines, and when used to clean up flat surfaces, carves with less resistance...

$12.99 - LEARN MORE or BUY NOW

<<Prev | 138 139 140 141 142 143 144 145 146 | Next>>

Contact Us | Submit Articles | RSS | SM Networks © 2016
>