411 Home Repair

Tools and Hardware

Rockler

Home > Rockler

<<Prev | 139 140 141 142 143 144 145 146 147 | Next>>

FlexCut® SK725 #11 x 3/16&quote Thumbnail Gouge

FlexCut® SK725 #11 x 3/16"e Thumbnail Gouge -

This deep thumbnail gouge is formed with a parabolic curve. The tool can be rolled 90° in either direction while cutting, changing the shape of the profile from a deeply curved #11 to a relatively flat #3 in one continuous cut. The thumbnail grind...

$15.99 - LEARN MORE or BUY NOW

Freud® Mortising Router Bits - 1/4´´ Shank

Freud® Mortising Router Bits - 1/4´´ Shank -

Freud´s Mortising Bits are designed with deep center gullets for maximum material removal without chip loading. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on CNC and other automatic routers as well as hand-held and table-mounted...

$18.97 - LEARN MORE or BUY NOW

1´´ Cherry Face Grain Knob

1´´ Cherry Face Grain Knob -

After finishing, these mushroom shaped knobs will surely complement the appearance of your doors and drawers. Attractive unfinished mushroom shaped knobs that can be stained, finished or painted as desired. 1´´ diameter x 15/16´´...

$6.49 - LEARN MORE or BUY NOW

Deflector/Connector for Grr-Rip Block™ and Grr-Ripper®

Deflector/Connector for Grr-Rip Block™ and Grr-Ripper® -

The Micro Jig Deflector/Connector keeps flying wood chips at bay and acts as an extended blade guard for the Grr-Ripper and Grr-Rip Block (#47145, #62689, #30737 sold separately). This useful accessory is great when working with larger stock, as it allows...

$12.95 - LEARN MORE or BUY NOW

4´´ E-Z Release C-Clamp

4´´ E-Z Release C-Clamp -

Opening most C-clamps to their full jaw capacity requires that you wind open the entire screw—a time consuming process. This C-clamp, however, features a quick-release button that lets you quickly slide it to the rough opening, then cinch it tight...

$9.99 - LEARN MORE or BUY NOW

Controller Bracket for CNC Shark

Controller Bracket for CNC Shark -

Specifically designed for the CNC Shark controller, this set of brackets attaches to the underside of your bench or table, providing a secure, accessible home for your CNC controller. The Controller Bracket is made of steel, and includes mounting hardware...

$19.99 - LEARN MORE or BUY NOW

Vanity Valet Secret

Vanity Valet Secret -

The Vanity Valet Secret transforms the false sink panel on your bathroom vanity into an organized storage solution for a hair dryer and up to three curling irons. Just open the panel to reveal a neat row of ventilated metal cups, which accept your hair...

$159.99 - LEARN MORE or BUY NOW

Laser Conversion Kit for CNC Sharks

Laser Conversion Kit for CNC Sharks -

If you´d like to upgrade your CNC Shark HD to be compatible with the Laser Engraving Module (#59803, sold separately), the wiring harness and small circuit board in this kit will do the trick. Once the conversion kit and laser module are installed,...

$49.99 - LEARN MORE or BUY NOW

Bed Extension for Jet® JWL-1015 and JWL-1015VS Lathes

Bed Extension for Jet® JWL-1015 and JWL-1015VS Lathes -

Extend the turning capacity of your Jet® JWL-1015 lathe (e.g. 47681, sold separately) from 15-1/2"e to 36-1/2"e with the JWL-1015 Bed Extension. The bed extension is built of the same heavy-duty cast iron as the lathe is, which means it soaks...

$149.99 - LEARN MORE or BUY NOW

Stand for Jet® JWL-1015 and JWL-1015VS Lathes

Stand for Jet® JWL-1015 and JWL-1015VS Lathes -

Convert your Jet® JWL-1015 lathe (e.g. 47681, sold separately) from a benchtop lathe to a free-standing lathe with the JWL-1015 Stand. The stand features extra-wide feet for excellent stability, and includes a convenient storage basket that keeps...

$279.99 - LEARN MORE or BUY NOW

<<Prev | 139 140 141 142 143 144 145 146 147 | Next>>

Contact Us | Submit Articles | RSS | SM Networks © 2016
>