411 Home Repair

Tools and Hardware

Power Tool Accessories

Home > Rockler > Power Tool Accessories

<<Prev | 40 41 42 43 44 45 46 47 48 | Next>>

Fein Hook-And-Loop Rapid-Attach Sanding Sheets, 50-pack-Single Grit

Fein Hook-And-Loop Rapid-Attach Sanding Sheets, 50-pack-Single Grit -

Sanding Sheets for use with the Fein MultiMaster. For universal application on nearly all surfaces. Corundum abrasive grain and full resin bond guarantee high abrasion performance. Unperforated, with hook-and-loop rapid attachment.

$24.99 - LEARN MORE or BUY NOW

Standard Forstner High Carbon Steel-Standard Forstner Bits - 1/2&quote Shank

Standard Forstner High Carbon Steel-Standard Forstner Bits - 1/2"e Shank -

Cut smooth, clean sides and flat bottom holes for cup hinges, mortising,doweling, hardware installation, or finishing up your turned salt & pepper shakers! These high carbon steel Forstner Bits have two bottom cutting edges that cut side grain or end...

$23.99 - LEARN MORE or BUY NOW

GRR-Ripper® Micro Jig Replacement 1/2´´ Leg

GRR-Ripper® Micro Jig Replacement 1/2´´ Leg -

Every once in a blue moon you miss the tunnel of your Grr-Ripper® push block and end up nicking the leg. Luckily, thanks to the push block, it´s a lot cheaper to replace a plastic leg than a finger (and a lot less painful). All three Grr-Ripper...

$14.99 - LEARN MORE or BUY NOW

Blade Stabilizers

Blade Stabilizers -

Blade stabilizers reduce vibration at the rim of your saw blade, instantly improving cut quality while reducing noise and extending blade life.

$22.99 - LEARN MORE or BUY NOW

Individual Standard Forstner Bits, High Carbon Steel-Standard Forstner Bits - 3/8&quote Shank

Individual Standard Forstner Bits, High Carbon Steel-Standard Forstner Bits - 3/8"e Shank -

Cut smooth, clean sides and flat bottom holes for cup hinges, mortising, doweling, hardware installation, or finishing up your turned salt & peppershakers! These high carbon steel Forstner Bits have two bottom cutting edges that cut side grain or end...

$5.99 - LEARN MORE or BUY NOW

Rockwell Sonicrafter® 2-1/2&quote Semi-Circular Diamond Coated Blade (RW8926)

Rockwell Sonicrafter® 2-1/2"e Semi-Circular Diamond Coated Blade (RW8926) -

The RW8925 Semicircle Carbide Grit Blade removes and scores grout, porous concrete, and masonry, and cuts and shapes plaster with ease. The blade profile is flat on the bottom side so you can easily cut into corners and adjoining surfaces. Universal Fit...

$26.49 - LEARN MORE or BUY NOW

Bench Cookie® Plus Work Grippers with Bench Cookie® Finishing Cones - Special Offer

Bench Cookie® Plus Work Grippers with Bench Cookie® Finishing Cones - Special Offer -

The finisher´s special – use the Bench Cookie® Work Grippers to hold your project while you sand a fine, smooth surface, then snap on the Finishing Cones and get out the varnish. The Bench Cookie® Finishing Cones allow you to finish...

$18.98 - LEARN MORE or BUY NOW

Rockler Beaded Base Molding Router Bit - 1-5/8&quote Dia x 2&quote H x 1/2&quote Shank

Rockler Beaded Base Molding Router Bit - 1-5/8"e Dia x 2"e H x 1/2"e Shank -

Use this bit to cut neatly tapered case moldings and baseboard moldings. When set with the guide bearing running against the material, the bit routs a small bead at the bottom of the molding—a subtle detail that looks great with or without a separate...

$84.99 - LEARN MORE or BUY NOW

Rockler Provincial Edge Router Bit - 1-1/8&quote Dia x 1&quote H x 1/2&quote Shank

Rockler Provincial Edge Router Bit - 1-1/8"e Dia x 1"e H x 1/2"e Shank -

Use this bit for applying a decorative edge, or to create moldings that are applied separately. You can leave shoulders on either side of the primary profile, or use only the triple round over section, which is 1/2"e high. Two flute, 5/8" ball...

$54.99 - LEARN MORE or BUY NOW

Rockler 30° Chamfer Bead Profile Router Bit - 1-1/4&quote Dia x 9/16&quote H x 1/2&quote Shank

Rockler 30° Chamfer Bead Profile Router Bit - 1-1/4"e Dia x 9/16"e H x 1/2"e Shank -

This Rockler exclusive bit is a perfect fit for drawer fronts to complement raised panel doors, especially straight or Shaker-style raised panel doors. The flat field with steps on either side is a classic design common on old molding planes, but hard...

$49.99 - LEARN MORE or BUY NOW

<<Prev | 40 41 42 43 44 45 46 47 48 | Next>>

Contact Us | Submit Articles | RSS | SM Networks © 2016
>