411 Home Repair

Tools and Hardware

Power Tool Accessories

Home > Rockler > Power Tool Accessories

<<Prev | 47 48 49 50 51 52 53 54 55 | Next>>

Olson® MachSpeed Scroll Saw Blades

Olson® MachSpeed Scroll Saw Blades -

Reverse teeth eliminate chipping on the underside of the workpiece, and cut on both the upstroke and the down stroke. Designed after the PGT Precision Ground Tooth blades, their wide teeth-spacing keeps the blade from bogging down. Precision milled to...

$6.99 - LEARN MORE or BUY NOW

Urethane Band Saw Tires - Fits 12&quote Bandsaw

Urethane Band Saw Tires - Fits 12"e Bandsaw -

These Urethane Bandsaw Tires stretch to fit without glue making installation easy! Plus, urethane won´t suffer from dry rot and because they´re not made of the usual rubber, they´ll stay flexible longer to increase the performance of...

$44.99 - LEARN MORE or BUY NOW

Individual Metric Forstner Bits - 3/8&quote Shank

Individual Metric Forstner Bits - 3/8"e Shank -

The top pick for smooth, flat-bottomed holes with no tearout. Outer cutting edge slices through the perimeter for a clean finish every time. Perfect for doweling, mortising, pocket holes, hardware installation and more! Also available in standard sizes.Presharpened...

$9.99 - LEARN MORE or BUY NOW

Rockler CNC Table

Rockler CNC Table -

At 28"e x 40"e, it´s large enough to accommodate any CNC Shark, as well as most other consumer CNC routers. Your controller hangs conveniently below the table in a saddle-shaped bracket, and is easy to access for emergency shut-downs. With...

$249.99 - LEARN MORE or BUY NOW

Powermatic 511 Panel Saw with 4´´ Dust Port

Powermatic 511 Panel Saw with 4´´ Dust Port -

Powermatic 511 Panel Saw with 4´ Dust PortStainless steel guide tubes with eight guide roller assemblies provide smooth carriage glideDual 4"e dust ports with nylon brush surrounding blade for front and rear dust exhaustTrue counterweight system...

$5,324.99 - LEARN MORE or BUY NOW

Hex Shank Tapered Plug Cutters-Hex Shank Tapered Plug Cutters

Hex Shank Tapered Plug Cutters-Hex Shank Tapered Plug Cutters -

Precision-ground edges and flute design cut precise edges that don´t require sanding! Suitable for both soft and hardwoods. Plug diameter is slightly tapered from one size to .025"e oversized. Available in 1/4"e, 3/8"e and 1/2"e...

$14.99 - LEARN MORE or BUY NOW

Standard High Speed Steel Brad Point Drill Bits

Standard High Speed Steel Brad Point Drill Bits -

These HSS standard brad point bits are ideal for doweling and other precision hole boring in softwood, hardwood and plywood. You´ll get a clean cut without tear-out! All bits are precision-ground high speed steel (HSS). With angled cutting spurs...

$3.99 - LEARN MORE or BUY NOW

Rockler/Insty-Drive Tapered Drill Bits and Countersinks

Rockler/Insty-Drive Tapered Drill Bits and Countersinks -

Tapered drill bits and countersinks are made of high-quality high speed steel (HSS). Both tapered bits and countersinks are removable and adjustable. Hex collars and hex shanks fit our Rockler exclusive Insty-Driver.

$19.99 - LEARN MORE or BUY NOW

Rockler/Insty Replacement Tapered Drill Bits

Rockler/Insty Replacement Tapered Drill Bits -

These tapered drill bits are perfectly matched for #5, #6, #8, #10 or #12 screws. They feature a high quality high speed steel (HSS) construction and are designed for use with the Rockler/Insty-Drive Tapered Drill Bits and Countersinks Set #69030 (sold...

$7.99 - LEARN MORE or BUY NOW

Onsrud Down-Cut Spiral Router Bits

Onsrud Down-Cut Spiral Router Bits -

Down-spiral cutting action forces the chips down into the groove, eliminating the tendency for wood fibers to chip out the face. Double-flute design with HSS (high speed steel) construction for a smooth finish. Recommended when chip flow should...

$19.99 - LEARN MORE or BUY NOW

<<Prev | 47 48 49 50 51 52 53 54 55 | Next>>

Contact Us | Submit Articles | RSS | SM Networks © 2016
>