411 Home Repair

Tools and Hardware

Power Tool Accessories

Home > Rockler > Power Tool Accessories

<<Prev | 83 84 85 86 87 88 89 90 91 | Next>>

Router Table Jointing Shims - 6 Pack

Router Table Jointing Shims - 6 Pack -

Allows outfeed fence to be shimmed in .010"e increments when using the router table to edge-joint boards. Shims can be combined to shave .070"e off an edge. Designed for use with the Rockler router table fence.

$6.99 - LEARN MORE or BUY NOW

Rockler Chamfer Reversible Rail & Stile Router Bit - 1-5/8&quote Dia x 15/16&quote H x 1/2&quote Shank

Rockler Chamfer Reversible Rail & Stile Router Bit - 1-5/8"e Dia x 15/16"e H x 1/2"e Shank -

For those who make cabinet doors only occasionally, this cutter provides an affordable, space-saving solution to routing cope and stick joints. One bit cuts both rail and stile profiles; just remove the cutters and rearrange them to go from coping rail...

$69.99 - LEARN MORE or BUY NOW

Dowel Centers Set

Dowel Centers Set -

Dowel centers allow you to precisely transfer the location of one set of dowel holes to the corresponding locations in the other half of a doweled joint. Just drill one set of holes, slip in the dowel centers and press the joint together. The pins on...

$7.99 - LEARN MORE or BUY NOW

Rockler French Traditional Router Bit - 1-1/2&quote Dia x 1-11/16&quote H x 1/2&quote Shank

Rockler French Traditional Router Bit - 1-1/2"e Dia x 1-11/16"e H x 1/2"e Shank -

With 1-11/16"e of carbide height, this bit turns out attractive small- to medium-sized crown moldings, window and door casings, picture frames, and chair rails. The bit features two flutes and a 1/2"e ball bearing guide.

$49.99 - LEARN MORE or BUY NOW

Rockler 3´´ Fence Flip Stop

Rockler 3´´ Fence Flip Stop -

Get set-up for fast, repeatable drilling and cutting. The aluminum arm flips down when you need it and stays out of the way when you don´t! Slides up and down any fence with a top-mounted T-track and locks down with a comfortable 1"e diameter...

$16.99 - LEARN MORE or BUY NOW

Rockler Porter-Cable Dovetail Jig Replacement Router Bit - 13/32&quote Dia x 1&quote H x 1/2&quote Shank

Rockler Porter-Cable Dovetail Jig Replacement Router Bit - 13/32"e Dia x 1"e H x 1/2"e Shank -

This is a replacement straight router bit for the 4212 Porter-Cable 12"e Dovetail Jig (29550, sold separately). Use it for box joints. Two flutes for optimal chip removal, with an overall Length of 2-1/2"e. Diameter is 13/32"e and carbide...

$17.99 - LEARN MORE or BUY NOW

Rockler Router Plate Insert With 2-1/2&quote Opening For Standard Plates

Rockler Router Plate Insert With 2-1/2"e Opening For Standard Plates -

The interchangeable insert for standard plates features a 2-1/2´´ opening. The 4´´ OD allows this insert to fit into a standard plate with a 3-1/4´´ opening.Is This The Right Insert For My Router Plate?Fits The Following...

$8.99 - LEARN MORE or BUY NOW

Rockler Large Trim for 2&quote Thick Doors Router Bit - 1&quote Dia x 2&quote H x 1/2&quote Shank

Rockler Large Trim for 2"e Thick Doors Router Bit - 1"e Dia x 2"e H x 1/2"e Shank -

If you need to trim a precise amount of wood off of doors and large panels, this kit will save you a lot of tedious setups and backaches. The kit uses a razor-sharp shear-cutting bit along with different bearing combinations to remove exactly 1/16"e,...

$89.99 - LEARN MORE or BUY NOW

CMT BTS-1 Bowl & Tray Router Bit System Kit- 1-1/4&quote Dia x 1/2&quote Shank

CMT BTS-1 Bowl & Tray Router Bit System Kit- 1-1/4"e Dia x 1/2"e Shank -

Whether for vegetable trays, salad bowls or hors d´oeuvre platters, this kit lets you make gorgeous divided bowls quickly and easily. No lathe? No problem. A band saw or jig saw can handle the outer circumference. For the interior, all you need...

$114.99 - LEARN MORE or BUY NOW

Rockler 3-Pc. Signmaking Router Bit Set - 1/4&quote Shank

Rockler 3-Pc. Signmaking Router Bit Set - 1/4"e Shank -

Save money over buying the bits separately! This set includes two V-groove bits and a round-nose bit—great for sign text, fluting and other decorative effects. All bits are carbide-tipped, with 1/4"e shanks.

$59.99 - LEARN MORE or BUY NOW

<<Prev | 83 84 85 86 87 88 89 90 91 | Next>>

Contact Us | Submit Articles | RSS | SM Networks © 2016
>