411 Home Repair

Tools and Hardware

Power Tool Accessories

Home > Rockler > Power Tool Accessories

<<Prev | 88 89 90 91 92 93 94 95 96 | Next>>

4-Piece Drill Press Accessory Kit

4-Piece Drill Press Accessory Kit -

4-Piece Drill Press Accessory Kit includes everything you need to make drill press operations a breeze:Drill Press Dust Port3 Stop Blocks. Each stop block contains:#33695 - 5/16"e x 1"e T-Bolt#34121 - 1"e Round 5/16"e-18 Through Hole KnobDrill...

$47.99 - LEARN MORE or BUY NOW

Rockler Router Lift FX

Rockler Router Lift FX -

Adjust bit height quickly and easily from atop your router table, and enjoy sag-free support from the heavy-duty plate. The plate is perfectly sized to fit all of our new router tables, while the lift housing accepts a wide range of small-to-medium sized...

$199.99 - LEARN MORE or BUY NOW

Micro Jig GRR-Ripper® Handle Bridge GRHB-010

Micro Jig GRR-Ripper® Handle Bridge GRHB-010 -

Provides four contact points to apply more downward pressure across the entire width of the Micro Jig GRR-Ripper® body for better control. Also includes replaceable push foot. Easily installs to the Micro Jig GRR-Ripper® Basic and Advanced 3D...

$15.99 - LEARN MORE or BUY NOW

Rockler Custom Door Edge Router Bit - 1-5/8&quote Dia x 1&quote H x 1/2&quote Shank

Rockler Custom Door Edge Router Bit - 1-5/8"e Dia x 1"e H x 1/2"e Shank -

Our Custom Door Edge Router Bit matches the most popular profile used in the kitchen cabinetry industry today. It is both decorative and functional, featuring a cove on the face side of the door and a bevel toward the rear, which makes it easy to open...

$59.99 - LEARN MORE or BUY NOW

Rockler Small Trim for 1&quote Thick Doors Router Bit - 3/4&quote Dia x 1&quote H x 1/2&quote Shank

Rockler Small Trim for 1"e Thick Doors Router Bit - 3/4"e Dia x 1"e H x 1/2"e Shank -

If you need to trim a precise amount of wood off of doors and large panels, this kit will save you a lot of tedious setups and backaches. The kit uses a razor-sharp shear-cutting bit along with different bearing combinations to remove exactly 1/16"e,...

$49.99 - LEARN MORE or BUY NOW

Rockler 8° Carbide Tip Dovetail Router Bit - 1/4&quote Dia x 1/8&quote Shank

Rockler 8° Carbide Tip Dovetail Router Bit - 1/4"e Dia x 1/8"e Shank -

Replacement 1/4"e carbide-tipped dovetail bit with a 1/8"e shank for use with Rockler´s Miniature Dovetail Template & Bit Kit (20618, sold separately). Requires 1/4"e-to-1/8"e collet adapter.

$19.99 - LEARN MORE or BUY NOW

Irwin® 10&quote x 40T Marathon® General Purpose Saw Blade

Irwin® 10"e x 40T Marathon® General Purpose Saw Blade -

The long distance runner! Blade has construction micro grain carbide tips for long life, plus a fully hardened plate to run truer longer.Features: Thin kerf and #400 grit diamond ground teeth for fast, clean cuts Precision tensioned and balanced for an...

$29.99 - LEARN MORE or BUY NOW

Router Plate Leveling and Locking Hardware Pack (for Custom Router Table Tops)

Router Plate Leveling and Locking Hardware Pack (for Custom Router Table Tops) -

Router Plate Leveling and Locking Hardware Pack consist of 8 each 40mm confirmats for leveling your router plate and 2 each threaded inserts for securing your plate to the table.

$6.49 - LEARN MORE or BUY NOW

Whirlwind Dust Port for Routers

Whirlwind Dust Port for Routers -

Designed as an accessory to Rockler´s Universal Router Base, this innovative two-piece system contains dust both above and below the bit for mess-free edge routing. The unique top attachment surrounds bit from above, creating a visible whirlwind...

$13.99 - LEARN MORE or BUY NOW

Fein MultiMaster Diamond File

Fein MultiMaster Diamond File -

Use for sharpening blades and cutters. Works with Fein MultiMaster.

$16.99 - LEARN MORE or BUY NOW

<<Prev | 88 89 90 91 92 93 94 95 96 | Next>>

Contact Us | Submit Articles | RSS | SM Networks © 2016
>