411 Home Repair

Tools and Hardware

Router Bits

Home > Rockler > Power Tool Accessories > Router Bits

<<Prev | 1 2 3 4 5 | Next>>

Rockler Ogee Base Molding Router Bit - 1-7/8&quote Dia x 3/4&quote H x 1/2&quote Shank

Rockler Ogee Base Molding Router Bit - 1-7/8"e Dia x 3/4"e H x 1/2"e Shank -

Unique new profile available only at Rockler! Designed especially for base molding, this carbide-tipped router bit also works well for edge-shaping tabletops, box and trunk tops, picture frames, and more. The classic Roman ogee profile softens the field...

$59.99 - LEARN MORE or BUY NOW

Freud® Quadra-Cut Roman Ogee Router Bit 1/2´´ Shank

Freud® Quadra-Cut Roman Ogee Router Bit 1/2´´ Shank -

Freud´s exclusive Quadra-Cut™ 4-cutter design provides the smoothest cuts possible. One pair of cutters shear upward to hog out the profile, while a smaller set of cutters shear downward to eliminate any fuzzing or chipping along the edges....

$45.97 - LEARN MORE or BUY NOW

Rockler Classical Roman Ogee Plunge Bit - 1/2´´ D x 3/8´´ H x 3/32´´ R x 1/4´´ Shank

Rockler Classical Roman Ogee Plunge Bit - 1/2´´ D x 3/8´´ H x 3/32´´ R x 1/4´´ Shank -

Roman Ogee in essence, this profile´s radiused bottom gives a positive-negative effect to the cut shape of successive passes. It is also very decorative if used in a single pass. With twin flute cutters, it is a great option for edge moldings or...

$22.99 - LEARN MORE or BUY NOW

Freud® Flute Bottom-Bearing Flush-Trim Router Bits - 1/2´´ Shank

Freud® Flute Bottom-Bearing Flush-Trim Router Bits - 1/2´´ Shank -

Trimming laminate counter tops and doing intricate pattern work with templates is a breeze with these flush-trim bits from Freud. Each bit features three flutes for a smooth, burn-free cut with minimal machining marks. With razor sharp carbide, you´ll...

$26.47 - LEARN MORE or BUY NOW

Freud® #99-064 Finger Pull Door Lip Router Bit, 1-3/4´´ D x 1-3/16´´H x 1/2´´ Shank

Freud® #99-064 Finger Pull Door Lip Router Bit, 1-3/4´´ D x 1-3/16´´H x 1/2´´ Shank -

Creates a decorative inverted ogee profile plus an easy-to-grip ridge around the perimeter of door and drawer fronts. If you only want the finger pull ridge on the bottom edge of your door and drawer fronts, use the matching 99-063 Door Edge Bit (#30430,...

$62.97 - LEARN MORE or BUY NOW

Freud® Dovetail Router Bits - 1/2´´ Shank

Freud® Dovetail Router Bits - 1/2´´ Shank -

Create strong, attractive joints for drawers, boxes and carcases with these Freud dovetail router bits. The 7° angle is very close to a 1:8 ratio, which is recommended for joining hardwoods and is very well-suited for decorative purposes such as exposed...

$22.97 - LEARN MORE or BUY NOW

Freud® #99-006 Quadra-Cut Roman Ogee Router Bit, 1-1/2´´ D x 21/32´´H x 21/64´´R x 1/2´´ Shank

Freud® #99-006 Quadra-Cut Roman Ogee Router Bit, 1-1/2´´ D x 21/32´´H x 21/64´´R x 1/2´´ Shank -

The ogee profile on this bit is reversed from the typical orientation, yielding a graceful cove on the face side, transitioning to a roundover on the edge. Freud´s exclusive Quadra-Cut™ 4-cutter design provides the smoothest cuts possible....

$65.97 - LEARN MORE or BUY NOW

Freud® #50-122 2-Flute Top-Bearing Flush-Trim Router Bit, 1-1/8´´ D x 1-1/2´´H x 1/2´´ Shank

Freud® #50-122 2-Flute Top-Bearing Flush-Trim Router Bit, 1-1/8´´ D x 1-1/2´´H x 1/2´´ Shank -

Thanks to the guide bearing being mounted on the shank side of this bit, the Freud 50-122 can be used to cut grooves, dados, mortises, recessed areas and other elements that only extend partially into the wood. It can also be used for sign lettering where...

$56.47 - LEARN MORE or BUY NOW

Freud® #80-572 Triple-Bead Router Bit, 1/8´´R x 7/8´´ D x 1-5/64´´H x 1/2´´ Shank

Freud® #80-572 Triple-Bead Router Bit, 1/8´´R x 7/8´´ D x 1-5/64´´H x 1/2´´ Shank -

Great for routing beaded columns, posts, decorative moldings and edging. Stock can be sized to rout three beads referenced off one edge and three off the opposite edge for a wider column. With the bit lowered in a router table, and just one bead exposed,...

$60.47 - LEARN MORE or BUY NOW

Rockler Carbide Signmaking Bit, 3/16´´ Dia. x 5/16´´H x 1/4´´ Shank

Rockler Carbide Signmaking Bit, 3/16´´ Dia. x 5/16´´H x 1/4´´ Shank -

This Carbide Signmaking Bit from Rockler is designed to work with our 1-1/2´´ Rockler Interlock Signmaker´s Templates - State Park Font Kit (#56091, sold separately). It has a rounded tip that gives the finished letters a bold, easy-to-read...

$17.99 - LEARN MORE or BUY NOW

<<Prev | 1 2 3 4 5 | Next>>

Contact Us | Submit Articles | RSS | SM Networks © 2016
>