411 Home Repair

Tools and Hardware

Router Bits

Home > Rockler > Power Tool Accessories > Router Bits

<<Prev | 8 9 10 11 12 13 14 15 16 | Next>>

1/4&quote Shank Rabbeting Bit Set

1/4"e Shank Rabbeting Bit Set -

This carbide rabbeting bit includes bearings for 5/16"e, 3/8"e, 7/16"e and 1/2"e deep rabbets. You can vary the cutting depth by changing bearings with the included hex wrench. Perfect for joinery applications such as for setting in cabinet...

$44.99 - LEARN MORE or BUY NOW

Rockler Undersized Plywood Router Bit Set

Rockler Undersized Plywood Router Bit Set -

Plywood is usually thinner than the nominal measurements indicate. As a result, regular size bits usually don´t cut a tight-fitting dado. Fortunately, undersized dado bits like these will help your joinery fit perfectly, resulting in stronger assemblies...

$44.99 - LEARN MORE or BUY NOW

Rockler Rabbeting Router Bit - 1-3/8&quote Dia x 1/2&quote H x 1/2&quote Shank

Rockler Rabbeting Router Bit - 1-3/8"e Dia x 1/2"e H x 1/2"e Shank -

This carbide rabbeting bit includes bearings for 5/16"e, 3/8"e, 7/16"e and 1/2"e deep rabbets. You can vary the cutting depth by changing bearings with the included hex wrench. Perfect for joinery applications such as for setting in cabinet...

$39.99 - LEARN MORE or BUY NOW

Rockler Specialty Molding Router Bit - 1-3/8&quote Dia x 1-5/8&quote H x 1/2&quote Shank

Rockler Specialty Molding Router Bit - 1-3/8"e Dia x 1-5/8"e H x 1/2"e Shank -

Give your furniture and cabinets a classic, architectural look with this unique molding bit. Perfect for chair rails, door casings, trim, pilasters, window casing/sills, baseboards and picture frames. You can use the full profile, or just a portion of...

$69.99 - LEARN MORE or BUY NOW

Rockler Specialty Molding Router Bit - 1&quote Dia x 1-3/8&quote H x 1/2&quote Shank

Rockler Specialty Molding Router Bit - 1"e Dia x 1-3/8"e H x 1/2"e Shank -

Give your furniture and cabinets a classic, architectural look with this unique molding bit. Perfect for chair rails, door casings, trim, pilasters, window casing/sills, baseboards and picture frames. You can use the full profile, or just a portion of...

$49.99 - LEARN MORE or BUY NOW

Rockler Edge V-Groove Router Bits - 1/2&quote Shank

Rockler Edge V-Groove Router Bits - 1/2"e Shank -

Mill the edges of your panel stock with these interlocking V-Groove Bits, and you´ll never have to worry about misaligned boards again. When it´s time to clamp up an edge joint, the parts slide into perfect alignment without any twisting,...

$39.99 - LEARN MORE or BUY NOW

Freud® Quadra-Cut™ Beading Router Bits - 1/2&quote Shank

Freud® Quadra-Cut™ Beading Router Bits - 1/2"e Shank -

Freud´s exclusive Quadra-Cut™ Beading Bits cut a precise radius with a step on either side, the perfect combination of tactile softness and visual definition. The 4 cutter Quadra-Cut design provides the smoothest cuts possible. You´ll...

$38.97 - LEARN MORE or BUY NOW

Rockler Beaded Base Molding Router Bit - 1-5/8&quote Dia x 2&quote H x 1/2&quote Shank

Rockler Beaded Base Molding Router Bit - 1-5/8"e Dia x 2"e H x 1/2"e Shank -

Use this bit to cut neatly tapered case moldings and baseboard moldings. When set with the guide bearing running against the material, the bit routs a small bead at the bottom of the molding—a subtle detail that looks great with or without a separate...

$84.99 - LEARN MORE or BUY NOW

Rockler Provincial Edge Router Bit - 1-1/8&quote Dia x 1&quote H x 1/2&quote Shank

Rockler Provincial Edge Router Bit - 1-1/8"e Dia x 1"e H x 1/2"e Shank -

Use this bit for applying a decorative edge, or to create moldings that are applied separately. You can leave shoulders on either side of the primary profile, or use only the triple round over section, which is 1/2"e high. Two flute, 5/8" ball...

$54.99 - LEARN MORE or BUY NOW

Rockler 30° Chamfer Bead Profile Router Bit - 1-1/4&quote Dia x 9/16&quote H x 1/2&quote Shank

Rockler 30° Chamfer Bead Profile Router Bit - 1-1/4"e Dia x 9/16"e H x 1/2"e Shank -

This Rockler exclusive bit is a perfect fit for drawer fronts to complement raised panel doors, especially straight or Shaker-style raised panel doors. The flat field with steps on either side is a classic design common on old molding planes, but hard...

$49.99 - LEARN MORE or BUY NOW

<<Prev | 8 9 10 11 12 13 14 15 16 | Next>>

Contact Us | Submit Articles | RSS | SM Networks © 2016
>