411 Home Repair

Tools and Hardware

Router Bits

Home > Rockler > Power Tool Accessories > Router Bits

<<Prev | 27 28 29 30 31 32 | Next>>

Rockler Vertical Panel Router Bit Set With Wooden Case

Rockler Vertical Panel Router Bit Set With Wooden Case -

This rail and stile set includes everything you need to create raised panel doors of nearly any size. The panel raiser is vertically oriented, which is ideal for smaller routers, and features a 5/8"e radius ogee profile that goes well with the beaded...

$149.99 - LEARN MORE or BUY NOW

Rockler Horizontal Panel Router Bit Set With Wooden Case

Rockler Horizontal Panel Router Bit Set With Wooden Case -

This rail-and-stile set includes everything you need to create raised-panel doors of nearly any size. The stile and rail cutters are full-height cutters. This means that if you jog your router table fence, they can be used to joint off saw marks no...

$149.99 - LEARN MORE or BUY NOW

Rockler 3-Pc. Roundover/Beading Router Bit Set - 1/2&quote Shank

Rockler 3-Pc. Roundover/Beading Router Bit Set - 1/2"e Shank -

This handy set consists of the most commonly used roundover bits: 1/4"e, 3/8"e and 1/2"e radius. Each bit comes with an extra 3/8"e bearing that can be used to convert the bit to a beading bit. Each bit also features a 1/2"e shank...

$89.99 - LEARN MORE or BUY NOW

Rockler Wedge Tongue and Groove Router Bit - 1-1/2&quote Dia x 1-3/16&quote H x 1/2&quote Shank

Rockler Wedge Tongue and Groove Router Bit - 1-1/2"e Dia x 1-3/16"e H x 1/2"e Shank -

Stronger than dowels and biscuits, the tongue and groove joints you´ll cut with this bit are perfect for edge-joining panels, table tops, or any other glue-up project. The interlocking design increases the available surface area for the glue, resulting...

$49.99 - LEARN MORE or BUY NOW

Rockler Straight Raised Panel Router Bit - 1-1/4&quote Dia x 1-5/8&quote H x 1/2&quote Shank

Rockler Straight Raised Panel Router Bit - 1-1/4"e Dia x 1-5/8"e H x 1/2"e Shank -

Vertical panel raising bits concentrate more of their weight toward the center of the bit, reducing strain on the motor, and allowing you to spin the bit at higher RPMs. This means you can raise panels with an ordinary 2 HP router mounted in a router...

$54.99 - LEARN MORE or BUY NOW

Rockler 14° Dovetail Pattern Router Bit - 1/2&quote Dia x 1/2&quote H x 1/4&quote Shank

Rockler 14° Dovetail Pattern Router Bit - 1/2"e Dia x 1/2"e H x 1/4"e Shank -

This Dovetail Pattern Bit includes a guide bearing that offers silky smooth operation when used with templates and dovetail jigs. All of our dovetail bits are specially designed with high radial and axial relief angles to give you extra clean, sharp edges....

$19.99 - LEARN MORE or BUY NOW

Rockler Full Bead Router Bit - 1-1/8&quote Dia x 5/8&quote H x 1/4&quote Shank

Rockler Full Bead Router Bit - 1-1/8"e Dia x 5/8"e H x 1/4"e Shank -

With both top- and bottom-mounted bearings, this beading bit lets you cut further into the panel, and in a variety of configurations, both freehand and in a table. It also doubles as a 1/4"e round over bit - just raise the bit until only the bottom...

$49.99 - LEARN MORE or BUY NOW

Rockler Raised Panel Router Bit - 1-1/4&quote Dia x 1-5/8&quote H x 1/2&quote Shank

Rockler Raised Panel Router Bit - 1-1/4"e Dia x 1-5/8"e H x 1/2"e Shank -

Vertical panel raising bits concentrate more of their weight toward the center of the bit, reducing strain on the motor, and allowing you to spin the bit at higher RPMs. This means you can raise panels with an ordinary 2 HP router mounted in a router...

$54.99 - LEARN MORE or BUY NOW

Rockler Flush Trim V-Groove Router Bit - 1/2&quote Dia x 1&quote H x 1/2&quote Shank

Rockler Flush Trim V-Groove Router Bit - 1/2"e Dia x 1"e H x 1/2"e Shank -

Sometimes it´s better to emphasize a seam than to try to hide it. This bit does just that, applying a neat decorative V-groove along the line of the seam. Since you no longer have to sand the joint perfectly flush as you would with a typical flush...

$22.99 - LEARN MORE or BUY NOW

Rockler Flush Trim V-Groove Router Bit - 1/2&quote Dia x 1&quote H x 1/4&quote Shank

Rockler Flush Trim V-Groove Router Bit - 1/2"e Dia x 1"e H x 1/4"e Shank -

Top quality bits that meet the high demands of Rockler Woodworking and Hardware. Bit has two flutes and 5/8" ball bearing guide. Use to trim cabinet face frames flush with cabinet sides - decorative V-groove conceals the seam.

$21.99 - LEARN MORE or BUY NOW

<<Prev | 27 28 29 30 31 32 | Next>>

Contact Us | Submit Articles | RSS | SM Networks © 2016
>