411 Home Repair

Tools and Hardware

Router Bits

Home > Rockler > Power Tool Accessories > Router Bits

<<Prev | 1 2 3 4 5 6 7 8 9 | Next>>

Freud® 22mm O.D. x 5/16´´ I.D. Slotting Cutter Bearing

Freud® 22mm O.D. x 5/16´´ I.D. Slotting Cutter Bearing -

This Freud guide bearing is for use with the Freud Slot Cutters (e.g. 37972, sold separately). It also works as a replacement bearing for the Slotting Cutter Router Bits (49948 and 31486, sold separately). Features top quality ball bearings with a high...

$6.80 - LEARN MORE or BUY NOW

Rockler Bullnose Router Bit - 3/8´´ Dia x 11/16´´ H x 3/16´´ R x 1/4´´ Shank

Rockler Bullnose Router Bit - 3/8´´ Dia x 11/16´´ H x 3/16´´ R x 1/4´´ Shank -

Cut perfectly rounded ends in a snap! Carbide-tipped bullnose bits cut a complete semicircle to bring the ends of stock to a uniformly round shape.Note: These are large bits to be safely used at reduced RPM.

$29.99 - LEARN MORE or BUY NOW

Rockler V-Groove Router Bits - 1/2&quote Shank

Rockler V-Groove Router Bits - 1/2"e Shank -

Commonly used for sign-making, these V-groove Bits provides excellent shadow and definition for letters and text. It is also ideal for fluted columns, or for adding a bead-board effect to panels. Top quality bits that meet the high standards of Rockler...

$23.99 - LEARN MORE or BUY NOW

Rockler Flattened Round Nose Router Bit - 1/2&quote Dia x 1&quote H x 3/16&quote R x 1/2&quote Shank

Rockler Flattened Round Nose Router Bit - 1/2"e Dia x 1"e H x 3/16"e R x 1/2"e Shank -

This signmaking bit features a unique flattened round-nose profile that allows you to cut to full depth with fewer passes and less wear and tear on your router. While the overall width is 1/2´´, the full profile is achieved by cutting only...

$26.99 - LEARN MORE or BUY NOW

Rockler 45° Lock Miter Router Bits - 1/2´´ Shank

Rockler 45° Lock Miter Router Bits - 1/2´´ Shank -

The interlocking fingers of our Lock Miter Router Bit provide a strong mechanical locking action that makes it much easier to clamp. There is no tendency for the joint to slide out of alignment under clamping pressure, and the wedged tenons tighten up...

$39.99 - LEARN MORE or BUY NOW

Freud® Lock Miter Bits - 1/2´´ Shank

Freud® Lock Miter Bits - 1/2´´ Shank -

Run one board vertically and the piece to be joined horizontally. the Lock Miter Bit cuts thinner panels for projects such as humidors and jewelry boxes. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on CNC and other automatic...

$95.97 - LEARN MORE or BUY NOW

Freud® 90° V Grooving Router Bits - 1/2´´ Shank

Freud® 90° V Grooving Router Bits - 1/2´´ Shank -

Freud´s "eV"e grooving bits are designed to cut deep or shallow 90 degree "eV"e grooves. Ideal for making signs and adding decorative accents to furniture and plaques. Cuts all composition materials, plywoods, hardwoods, and softwoods....

$31.97 - LEARN MORE or BUY NOW

Freud® Round Nose Router Bits - 1/4&quote Shank

Freud® Round Nose Router Bits - 1/4"e Shank -

Freud´s Round Nose Router Bits can be used for fluted millwork, signs and decorative veining, as well as for practical features such as finger pulls and drain rails for cutting boards.These Round Nose Router Bits cut all composition materials, plywoods,...

$19.97 - LEARN MORE or BUY NOW

Rockler Signmaking Carbide Router Bits - 1/4&quote Shank

Rockler Signmaking Carbide Router Bits - 1/4"e Shank -

Specially designed for signmaking applications, with a flatter bottom to prevent peaks in routed letters. Recommended for use with plunge router. 1/4"e shank.The 3/8"e Signmaking Carbide Router Bit is required for the 2-1/4"e Rockler Interlock...

$19.99 - LEARN MORE or BUY NOW

Rockler Hinge Mortising Router Bits - 1/2&quote Shank

Rockler Hinge Mortising Router Bits - 1/2"e Shank -

Use this mortising bit for insetting hinge leaves, stair treads, and for general purpose routing of large shallow recesses. The shorter length of the cutter makes it easy to pull the bit back far enough for very shallow mortises.

$16.99 - LEARN MORE or BUY NOW

<<Prev | 1 2 3 4 5 6 7 8 9 | Next>>

Contact Us | Submit Articles | RSS | SM Networks © 2016
>