411 Home Repair

Tools and Hardware

Edge Forming Router Bits

Home > Rockler > Power Tool Accessories > Router Bits > Edge Forming Router Bits

<<Prev | 1 2 3 4 5 | Next>>

Rockler Ogee Base Molding Router Bit - 1-7/8&quote Dia x 3/4&quote H x 1/2&quote Shank

Rockler Ogee Base Molding Router Bit - 1-7/8"e Dia x 3/4"e H x 1/2"e Shank -

Unique new profile available only at Rockler! Designed especially for base molding, this carbide-tipped router bit also works well for edge-shaping tabletops, box and trunk tops, picture frames, and more. The classic Roman ogee profile softens the field...

$59.99 - LEARN MORE or BUY NOW

Freud® Quadra-Cut Roman Ogee Router Bit 1/2´´ Shank

Freud® Quadra-Cut Roman Ogee Router Bit 1/2´´ Shank -

Freud´s exclusive Quadra-Cut™ 4-cutter design provides the smoothest cuts possible. One pair of cutters shear upward to hog out the profile, while a smaller set of cutters shear downward to eliminate any fuzzing or chipping along the edges....

$45.97 - LEARN MORE or BUY NOW

Freud® Flute Bottom-Bearing Flush-Trim Router Bits - 1/2´´ Shank

Freud® Flute Bottom-Bearing Flush-Trim Router Bits - 1/2´´ Shank -

Trimming laminate counter tops and doing intricate pattern work with templates is a breeze with these flush-trim bits from Freud. Each bit features three flutes for a smooth, burn-free cut with minimal machining marks. With razor sharp carbide, you´ll...

$26.47 - LEARN MORE or BUY NOW

Freud® #99-006 Quadra-Cut Roman Ogee Router Bit, 1-1/2´´ D x 21/32´´H x 21/64´´R x 1/2´´ Shank

Freud® #99-006 Quadra-Cut Roman Ogee Router Bit, 1-1/2´´ D x 21/32´´H x 21/64´´R x 1/2´´ Shank -

The ogee profile on this bit is reversed from the typical orientation, yielding a graceful cove on the face side, transitioning to a roundover on the edge. Freud´s exclusive Quadra-Cut™ 4-cutter design provides the smoothest cuts possible....

$65.97 - LEARN MORE or BUY NOW

Freud® #50-122 2-Flute Top-Bearing Flush-Trim Router Bit, 1-1/8´´ D x 1-1/2´´H x 1/2´´ Shank

Freud® #50-122 2-Flute Top-Bearing Flush-Trim Router Bit, 1-1/8´´ D x 1-1/2´´H x 1/2´´ Shank -

Thanks to the guide bearing being mounted on the shank side of this bit, the Freud 50-122 can be used to cut grooves, dados, mortises, recessed areas and other elements that only extend partially into the wood. It can also be used for sign lettering where...

$56.47 - LEARN MORE or BUY NOW

Freud® Ogee Router Bits - 1/4&quote Shank

Freud® Ogee Router Bits - 1/4"e Shank -

Add a distinctive edge profile to cabinets, furniture, plaques, and millwork with these decorative ogee edging bits. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on CNC and other automatic routers as well as hand-held and table-mounted...

$40.47 - LEARN MORE or BUY NOW

Freud® Bevel Trim Router Bits - 1/4&quote Shank

Freud® Bevel Trim Router Bits - 1/4"e Shank -

When it comes time to trim your plastic laminates, you want a clean, finished edge that feels as nice as it looks. These Freud® Bevel Trim Router Bits are the perfect candidates. Available in bevels of 8°, 15° and 45°, the bits cut all...

$28.97 - LEARN MORE or BUY NOW

Freud® Top Bearing Mortising Dado Router Bits - 1/4&quote Shank

Freud® Top Bearing Mortising Dado Router Bits - 1/4"e Shank -

Freud´s bearing-guided mortising bits can be used with templates for perfect accuracy and repeatability. They are designed with deep center gullets for maximum material removal without chip loading. Cuts all composition materials, plywoods, hardwoods,...

$22.47 - LEARN MORE or BUY NOW

Freud® Top Bearing Flush Trim Router Bits - 1/2&quote Shank

Freud® Top Bearing Flush Trim Router Bits - 1/2"e Shank -

The top-mounted guide bearings on these router bits make them ideal for grooving, lettering and dadoes, as well as any other template work where the template is mounted on the top face of the workpiece. Cuts all composition materials, plywoods, hardwoods,...

$31.97 - LEARN MORE or BUY NOW

Freud® 41-502 Radius Laminate Trim Router Bit - 1/2&quote Dia x 3/8&quote H x 1/4&quote Shank

Freud® 41-502 Radius Laminate Trim Router Bit - 1/2"e Dia x 3/8"e H x 1/4"e Shank -

This Laminate Trimming Router Bit from Freud trims plastic laminate edges in a fraction of the time that it takes to hand file them. Plus, the 1/16"e radius gives you a silky smooth edge with no burrs or sharp spots. It´s ideal for countertop-grade...

$29.47 - LEARN MORE or BUY NOW

<<Prev | 1 2 3 4 5 | Next>>

Contact Us | Submit Articles | RSS | SM Networks © 2016
>