411 Home Repair

Tools and Hardware

Edge Forming Router Bits

Home > Rockler > Power Tool Accessories > Router Bits > Edge Forming Router Bits

<<Prev | 7 8 9 10 11 12 | Next>>

Rockler Shear Flush Trim Bit Router Bit - 3/4&quote Dia x 1-1/2&quote H x 1/2&quote Shank

Rockler Shear Flush Trim Bit Router Bit - 3/4"e Dia x 1-1/2"e H x 1/2"e Shank -

Instead of chopping at the wood fibers at a 90° angle, the twin shear cutters on this bit slice through stock at a slight angle, producing a smoother cut than traditional straight-fluted bits. The unique design also helps eliminate tear-out problems...

$34.99 - LEARN MORE or BUY NOW

Rockler Classical Miniature Roman Ogee Plunge Router Bit - 3/4&quote Dia x 7/16&quote H x 1/2&quote Shank

Rockler Classical Miniature Roman Ogee Plunge Router Bit - 3/4"e Dia x 7/16"e H x 1/2"e Shank -

Based on a miniature Roman ogee design, this profile can be used in successive cuts, then ripped down for astragals, in series for decorative fluting patterns, or in single cuts for a flat bottom trench with profiled sides. 3/4"e diameter with a sturdy,...

$26.99 - LEARN MORE or BUY NOW

Rockler Custom Door Edge Router Bit - 1-5/8&quote Dia x 1&quote H x 1/2&quote Shank

Rockler Custom Door Edge Router Bit - 1-5/8"e Dia x 1"e H x 1/2"e Shank -

Our Custom Door Edge Router Bit matches the most popular profile used in the kitchen cabinetry industry today. It is both decorative and functional, featuring a cove on the face side of the door and a bevel toward the rear, which makes it easy to open...

$59.99 - LEARN MORE or BUY NOW

Rockler Small Trim for 1&quote Thick Doors Router Bit - 3/4&quote Dia x 1&quote H x 1/2&quote Shank

Rockler Small Trim for 1"e Thick Doors Router Bit - 3/4"e Dia x 1"e H x 1/2"e Shank -

If you need to trim a precise amount of wood off of doors and large panels, this kit will save you a lot of tedious setups and backaches. The kit uses a razor-sharp shear-cutting bit along with different bearing combinations to remove exactly 1/16"e,...

$49.99 - LEARN MORE or BUY NOW

Rockler 3-Pc. Roundover/Beading Router Bit Set - 1/2&quote Shank

Rockler 3-Pc. Roundover/Beading Router Bit Set - 1/2"e Shank -

This handy set consists of the most commonly used roundover bits: 1/4"e, 3/8"e and 1/2"e radius. Each bit comes with an extra 3/8"e bearing that can be used to convert the bit to a beading bit. Each bit also features a 1/2"e shank...

$89.99 - LEARN MORE or BUY NOW

Rockler Full Bead Router Bit - 1-1/8&quote Dia x 5/8&quote H x 1/4&quote Shank

Rockler Full Bead Router Bit - 1-1/8"e Dia x 5/8"e H x 1/4"e Shank -

With both top- and bottom-mounted bearings, this beading bit lets you cut further into the panel, and in a variety of configurations, both freehand and in a table. It also doubles as a 1/4"e round over bit - just raise the bit until only the bottom...

$49.99 - LEARN MORE or BUY NOW

Rockler Flush Trim V-Groove Router Bit - 1/2&quote Dia x 1&quote H x 1/2&quote Shank

Rockler Flush Trim V-Groove Router Bit - 1/2"e Dia x 1"e H x 1/2"e Shank -

Sometimes it´s better to emphasize a seam than to try to hide it. This bit does just that, applying a neat decorative V-groove along the line of the seam. Since you no longer have to sand the joint perfectly flush as you would with a typical flush...

$22.99 - LEARN MORE or BUY NOW

Rockler Flush Trim V-Groove Router Bit - 1/2&quote Dia x 1&quote H x 1/4&quote Shank

Rockler Flush Trim V-Groove Router Bit - 1/2"e Dia x 1"e H x 1/4"e Shank -

Top quality bits that meet the high demands of Rockler Woodworking and Hardware. Bit has two flutes and 5/8" ball bearing guide. Use to trim cabinet face frames flush with cabinet sides - decorative V-groove conceals the seam.

$21.99 - LEARN MORE or BUY NOW

Rockler Miniature Classic Router Bit - 1/2&quote Dia x 3/8&quote H x 1/4&quote Shank

Rockler Miniature Classic Router Bit - 1/2"e Dia x 3/8"e H x 1/4"e Shank -

You can use this unique bit for cutting decorative flutes or routing letters on signs. With its wave-shaped profile, you´ll get a more ornate look than with typical router bits. Alternatively, the bit can be used in the router table to apply an...

$19.99 - LEARN MORE or BUY NOW

Rockler Miniature Chamfer Router Bit - 13/16&quote Dia x 5/16&quote H x 1/4&quote Shank

Rockler Miniature Chamfer Router Bit - 13/16"e Dia x 5/16"e H x 1/4"e Shank -

At first glance, you might think a miniature chamfer bit cuts the same edge as a full-size chamfer bit—a 45 degree angle, right? Right. But where these miniature bits excel is in cutting inside corners. Because of the tiny guide bearing, they cut...

$19.99 - LEARN MORE or BUY NOW

<<Prev | 7 8 9 10 11 12 | Next>>

Contact Us | Submit Articles | RSS | SM Networks © 2016
>