411 Home Repair

Tools and Hardware

Hand Tools

Home > Rockler > Hand Tools

<<Prev | 1 2 3 4 5 6 | Next>>

FlexCut® Interchangeable Micro Gouges

FlexCut® Interchangeable Micro Gouges -

These micro carving gouges are ideal for fine detail work, and feature curved cutting edges for carving hollows, rounds and sweeping curves. They are available in a range of widths and sweeps. Lower sweep #s are flatter, while higher #s are more U-shaped....

$15.99 - LEARN MORE or BUY NOW

Replacement Blades for FastCap Quad Trimmer, 2-Pack

Replacement Blades for FastCap Quad Trimmer, 2-Pack -

These are replacement carbon steel blades for the FastCap Quad Trimmer (#45318, sold separately). Given proper care and fresh blades when the old ones are worn out, your Quad Trimmer can last indefinitely. The pack includes two replacement blades with...

$10.99 - LEARN MORE or BUY NOW

FlexCut® SK367 1/8&quote x 45° V-Spoon

FlexCut® SK367 1/8"e x 45° V-Spoon -

This V-shaped spoon gouge from Flexcut feature a shank that´s curved at the end, much like a deep soup spoon. The curved shank lets you reach the bottoms of recesses and other hard-to-access areas. The V-shaped profile is ideal for parting, as well...

$15.99 - LEARN MORE or BUY NOW

FlexCut® SK735 7/16´´ Macaroni Carving Tool

FlexCut® SK735 7/16´´ Macaroni Carving Tool -

Flexcut´s Macaroni Carving Tool is essentially two V-tools in one, and can be used at an angle for parting, creating lines and texturing. In addition, it is used as a channeling tool for flat surfaces with an adjoining, raised border. This is an...

$16.99 - LEARN MORE or BUY NOW

FlexCut® SK760 1/2´´ x 60° Soft V-Tool

FlexCut® SK760 1/2´´ x 60° Soft V-Tool -

Flexcut´s Soft V-Tool is similar to a standard V-Tool, but the point of the V is slightly rounded, allowing it to double as a small gouge. It can also be used as a parting tool for creating lines and textures, and it can be rolled onto its side...

$16.99 - LEARN MORE or BUY NOW

FlexCut® SK308 #2 x 5/16´´ Double-Bevel Skew Chisel

FlexCut® SK308 #2 x 5/16´´ Double-Bevel Skew Chisel -

With the cutting edge skewed at an angle relative to the sides of the blade, this carving chisel can be used to reach into corners and other tight spaces. It also excels at creating lines, and when used to clean up flat surfaces, carves with less resistance...

$12.99 - LEARN MORE or BUY NOW

FlexCut® SK725 #11 x 3/16&quote Thumbnail Gouge

FlexCut® SK725 #11 x 3/16"e Thumbnail Gouge -

This deep thumbnail gouge is formed with a parabolic curve. The tool can be rolled 90° in either direction while cutting, changing the shape of the profile from a deeply curved #11 to a relatively flat #3 in one continuous cut. The thumbnail grind...

$15.99 - LEARN MORE or BUY NOW

Bahco Ergo Carbide Scraper

Bahco Ergo Carbide Scraper -

The Bahco Ergo scraper features a cemented carbide scraper blade that´s 2.5 times harder than hardened steel and lasts over 50 times longer than conventional steel blades. Mounted in the supremely comfortable Bahco Ergo handle, the blade works beautifully...

$24.99 - LEARN MORE or BUY NOW

Digital Torque Adapter, 1/2´´ Drive

Digital Torque Adapter, 1/2´´ Drive -

Quickly and easily convert any ordinary ratchet or breaker bar into a digital torque measuring device with this handy adapter! Once installed, you can use it to tighten fasteners to a specific torque rating, or to re-calibrate another torque wrench to...

$59.99 - LEARN MORE or BUY NOW

1/2´´ Drive to 3/8´´ Drive Socket Reducer

1/2´´ Drive to 3/8´´ Drive Socket Reducer -

If you want the increased leverage of a larger socket wrench but don´t want to buy a whole set of 1/2´´ drive sockets, this adapter will do the trick. Use it to attach a wide variety of 3/8´´ drive sockets, extensions and...

$2.99 - LEARN MORE or BUY NOW

<<Prev | 1 2 3 4 5 6 | Next>>

Contact Us | Submit Articles | RSS | SM Networks © 2016
>