411 Home Repair

Tools and Hardware

Joinery Router Bits

Home > Rockler > Power Tool Accessories > Router Bits > Joinery Router Bits

<<Prev | 1 2 3 | Next>>

Freud® Dovetail Router Bits - 1/2´´ Shank

Freud® Dovetail Router Bits - 1/2´´ Shank -

Create strong, attractive joints for drawers, boxes and carcases with these Freud dovetail router bits. The 7° angle is very close to a 1:8 ratio, which is recommended for joining hardwoods and is very well-suited for decorative purposes such as exposed...

$22.97 - LEARN MORE or BUY NOW

Freud® Dovetail Router Bits - 1/4&quote Shank

Freud® Dovetail Router Bits - 1/4"e Shank -

Compatible with many popular dovetail jigs, these bits produce smooth, intricate dovetail joints. Use the 1/2"eH dovetail bits for drawer stock, and the 13/16"eH dovetail bits for 3/4"e thick carcases. Cut all composition materials, plywoods,...

$17.47 - LEARN MORE or BUY NOW

Rockler 45° Lock Miter Router Bits - 1/2´´ Shank

Rockler 45° Lock Miter Router Bits - 1/2´´ Shank -

The interlocking fingers of our Lock Miter Router Bit provide a strong mechanical locking action that makes it much easier to clamp. There is no tendency for the joint to slide out of alignment under clamping pressure, and the wedged tenons tighten up...

$39.99 - LEARN MORE or BUY NOW

Freud® Lock Miter Bits - 1/2´´ Shank

Freud® Lock Miter Bits - 1/2´´ Shank -

Run one board vertically and the piece to be joined horizontally. the Lock Miter Bit cuts thinner panels for projects such as humidors and jewelry boxes. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on CNC and other automatic...

$95.97 - LEARN MORE or BUY NOW

Freud® 99-240 Drawer Lock Router Bit - 2&quote Dia x 33/64&quote H x 1/2&quote Shank

Freud® 99-240 Drawer Lock Router Bit - 2"e Dia x 33/64"e H x 1/2"e Shank -

Drawer fronts are formed horizontally, flat on the table surface. Drawer sides are formed vertically against the fence of the table. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on table-mounted portable routers.

$40.47 - LEARN MORE or BUY NOW

Rockler Edge V-Groove Router Bits - 1/2&quote Shank

Rockler Edge V-Groove Router Bits - 1/2"e Shank -

Mill the edges of your panel stock with these interlocking V-Groove Bits, and you´ll never have to worry about misaligned boards again. When it´s time to clamp up an edge joint, the parts slide into perfect alignment without any twisting,...

$39.99 - LEARN MORE or BUY NOW

Rockler Tongue and Groove Router Bit - 3/8&quote Dia x 1/4&quote H x 1/4&quote Shank

Rockler Tongue and Groove Router Bit - 3/8"e Dia x 1/4"e H x 1/4"e Shank -

This arbor includes two slotting cutters, two bearings and a pack of shims that allow you to configure and adjust the cutter for perfectly fitting tongue and groove joints. Use it to machine flat panel doors and cabinet panels, to create tongue and groove...

$57.99 - LEARN MORE or BUY NOW

Rockler High Drawer Lock Router Bit - 1-1/16&quote Dia x 3/4&quote H x 1/2&quote Shank

Rockler High Drawer Lock Router Bit - 1-1/16"e Dia x 3/4"e H x 1/2"e Shank -

This unique bit is similar to a locking rabbet bit, but it cuts two tongues instead of one for added mechanical strength and additional gluing surface. The wedged profile of the tongues helps everything snug up under clamping pressure, while still exposing...

$44.99 - LEARN MORE or BUY NOW

1-1/16&quote Diameter X 3/4&quote High Drawer Lock Bit

1-1/16"e Diameter X 3/4"e High Drawer Lock Bit -

This unique bit is similar to a locking rabbet bit, but it cuts two tongues instead of one for added mechanical strength and additional gluing surface. The wedged profile of the tongues helps everything snug up under clamping pressure, while still exposing...

$44.99 - LEARN MORE or BUY NOW

Rockler Tongue and Groove Router Bit - 3/8&quote Dia x 1/4&quote H x 1/2&quote Shank

Rockler Tongue and Groove Router Bit - 3/8"e Dia x 1/4"e H x 1/2"e Shank -

This arbor includes two slotting cutters, two bearings and a pack of shims that allow you to configure and adjust the cutter for perfectly fitting tongue and groove joints. Use it to machine flat panel doors and cabinet panels, to create tongue and groove...

$59.99 - LEARN MORE or BUY NOW

<<Prev | 1 2 3 | Next>>

Contact Us | Submit Articles | RSS | SM Networks © 2016
>