411 Home Repair

Tools and Hardware

Carving

Home > Rockler > Hand Tools > Carving

<<Prev | 1 2 3 4 5 | Next>>

FlexCut® Interchangeable Gouges

FlexCut® Interchangeable Gouges -

These carving gouges feature curved cutting edges for carving hollows, rounds and sweeping curves. They are available in a range of widths and sweeps to suit a huge variety of applications. Gouges are numbered with sweeps from #1 (nearly flat) to #11...

$12.99 - LEARN MORE or BUY NOW

FlexCut® Interchangeable Carving Chisels

FlexCut® Interchangeable Carving Chisels -

With their straight, single-bevel cutting edges, Flexcut´s Interchangeable Carving Chisels are perfect for carving lines and cleaning up flat surfaces. All are unhandled carving tools, and fit the Flexcut® SK100 Quick Connect Handle (#20219,...

$12.99 - LEARN MORE or BUY NOW

FlexCut® Interchangeable Spoon Gouges

FlexCut® Interchangeable Spoon Gouges -

These spoon gouges from Flexcut feature a shank that´s curved at the end, much like a deep soup spoon. The curved shank lets you reach the bottoms of recesses and other hard-to-access areas. A good application, for example, would be hollowing out...

$14.99 - LEARN MORE or BUY NOW

FlexCut® Interchangeable V-Tools

FlexCut® Interchangeable V-Tools -

With their V-shaped tip profile, these carving tools from Flexcut are ideal for parting, as well as creating lines and textures. All are unhandled carving tools, and fit the Flexcut® SK100 Quick Connect Handle (20219, sold separately). As with all...

$13.99 - LEARN MORE or BUY NOW

FlexCut® Interchangeable Micro Gouges

FlexCut® Interchangeable Micro Gouges -

These micro carving gouges are ideal for fine detail work, and feature curved cutting edges for carving hollows, rounds and sweeping curves. They are available in a range of widths and sweeps. Lower sweep #s are flatter, while higher #s are more U-shaped....

$15.99 - LEARN MORE or BUY NOW

FlexCut® SK367 1/8&quote x 45° V-Spoon

FlexCut® SK367 1/8"e x 45° V-Spoon -

This V-shaped spoon gouge from Flexcut feature a shank that´s curved at the end, much like a deep soup spoon. The curved shank lets you reach the bottoms of recesses and other hard-to-access areas. The V-shaped profile is ideal for parting, as well...

$15.99 - LEARN MORE or BUY NOW

FlexCut® SK735 7/16´´ Macaroni Carving Tool

FlexCut® SK735 7/16´´ Macaroni Carving Tool -

Flexcut´s Macaroni Carving Tool is essentially two V-tools in one, and can be used at an angle for parting, creating lines and texturing. In addition, it is used as a channeling tool for flat surfaces with an adjoining, raised border. This is an...

$16.99 - LEARN MORE or BUY NOW

FlexCut® SK760 1/2´´ x 60° Soft V-Tool

FlexCut® SK760 1/2´´ x 60° Soft V-Tool -

Flexcut´s Soft V-Tool is similar to a standard V-Tool, but the point of the V is slightly rounded, allowing it to double as a small gouge. It can also be used as a parting tool for creating lines and textures, and it can be rolled onto its side...

$16.99 - LEARN MORE or BUY NOW

FlexCut® SK308 #2 x 5/16´´ Double-Bevel Skew Chisel

FlexCut® SK308 #2 x 5/16´´ Double-Bevel Skew Chisel -

With the cutting edge skewed at an angle relative to the sides of the blade, this carving chisel can be used to reach into corners and other tight spaces. It also excels at creating lines, and when used to clean up flat surfaces, carves with less resistance...

$12.99 - LEARN MORE or BUY NOW

FlexCut® SK725 #11 x 3/16&quote Thumbnail Gouge

FlexCut® SK725 #11 x 3/16"e Thumbnail Gouge -

This deep thumbnail gouge is formed with a parabolic curve. The tool can be rolled 90° in either direction while cutting, changing the shape of the profile from a deeply curved #11 to a relatively flat #3 in one continuous cut. The thumbnail grind...

$15.99 - LEARN MORE or BUY NOW

<<Prev | 1 2 3 4 5 | Next>>

Contact Us | Submit Articles | RSS | SM Networks © 2016
>