Making an Aluminum Window Screen Frame

Occasionally a metal screen will fall out, be blown out or otherwise damaged beyond repair. Then there are windows, especially in older houses that are odd sizes for which a screen is desired.

Materials to make a replacement screen or odd-sized screen can be purchased at many building material or hardware stores. The framing material usually comes in lengths of 6 feet so measure the opening into which the frame must fit before you buy the material. Buy enough material to make the four sides. In addition buy a package of four corner braces. Then proceed as follows:

	Step 1. Mark off a 45 degree angle near one end of the material.
	Step 2. Mark off a distance equal to one side of the opening being sure to mark on the long side.
	Step 3. Cut another 45 degree angle so the piece looks like the side of a picture frame.
	Step 4. Insert a corner brace into each end of one of the pieces and attach two more sides so you have a "U" shape.
	Step 5. Insert the remaining 2 corner braces into the last side and attach to the frame.
	Step 6. Install the screen fabric as described in the section on Replacing Screens on Aluminum Frame.

Article Credits & appreciation

Additional Resources

• Home Maintenance for Dummies
• HandyMa'am (TM): Home Improvement, Decorating, & Maintenance Tips & Projects for You and Your Family
• The Virgin Homeowner : The Essential Guide to Owning, Maintaining, and Surviving Your Home
• New Fix-It-Yourself Manual

Want to get published?

Contact us to submit an article to be listed on our website.

This article does not necessarily reflect the views of 411 Home Repair, and is only a suggestions and/or comments submitted to our site to share with our site viewers through the world wide web.